Understanding the POP 1.0's Dual Action

The 01EDC POP 1.0 Push Slider combines magnetic and mechanical structures. It uses springs and beads to create a distinct tactile feedback when you press to fold the plate. The main gameplay involves swinging the plate to unfold, then pressing it back into place, with six segments of feedback. If you only press four segments, the plate automatically rebounds.

This unique mechanism means that maintaining smooth action requires attention to both the magnetic parts and the moving mechanical components. Regular care will keep the slider feeling crisp and responsive.

What the Catalog Confirms About the POP 1.0

  • 01EDC POP 1.0 Push Slider: The POP Push Slider is brand new, comes sealed and boxed, complete with all accessories. You start with a clean, factory-fresh unit. This means you don't need to worry about prior wear or contamination, but you should still follow a break-in routine to achieve optimal feel.

    01EDC POP 1.0 Push Slider

    01EDC POP 1.0 Push Slider

  • 01EDC POP 1.0 Push Slider: By replacing springs and beads, completely different tactile feedback can be achieved. The slider is designed for customization. If the action feels too stiff or too loose after some use, swapping springs or beads is a supported way to restore or change the feel.

A Simple Maintenance Routine for Smooth Action

These steps are based on the POP 1.0's design. Always work on a clean, soft surface to avoid losing small parts.

  1. 1. Clean the exterior and track: Use a dry, lint-free cloth to wipe the titanium body and the plate surface. For the track area, a soft brush (like a clean paintbrush) can remove dust and debris that might interfere with the magnetic action. Do not use water or solvents unless you are sure they are safe for the anodized finish.
  2. 2. Check the spring and bead tension: The POP 1.0 uses springs and beads to produce its six-segment feedback. If the action feels uneven, inspect the springs for any visible damage or deformation. The beads should move freely but not rattle. The catalog confirms you can replace these components to adjust feedback.
  3. 3. Lubricate sparingly (if needed): If the mechanical action feels gritty, a tiny drop of lightweight lubricant (like a synthetic oil made for precision instruments) can be applied to the spring contact points. Avoid over-lubricating, as excess oil can attract dust and affect the magnetic parts. The catalog does not specify a lubricant, so use your best judgment and test on a small area first.
  4. 4. Test the six-segment feedback: After cleaning and lubrication, press the plate to fold it. You should feel six distinct segments of feedback. If the plate rebounds after only four presses, the mechanism is working correctly. If it feels sticky or skips segments, repeat the cleaning step, focusing on the track and spring assembly.

What to Do If Action Feels Off

If the slider feels too stiff or too loose, the first step is to confirm that the plate is properly seated and the springs are in their correct positions. The POP 1.0 is designed to allow replacement of springs and beads, so if cleaning doesn't resolve the issue, consider swapping these parts.

The catalog also notes that the slider can be unfolded by lightly touching the gap between the plate and the top of the main body, without needing to swing it. This feature can help you diagnose if the issue is with the swing mechanism or the press action.

Ordering and Delivery Facts to Plan Around

The 01EDC POP 1.0 Push Slider ships from China. Tracking is available within 2–4 business days, and delivery typically takes 8–14 business days after tracking is provided. Keep this in mind when planning your maintenance routine or if you need replacement springs or beads.

The item comes with all accessories, so you should have everything you need to start. Variants are available in Crystal Titanium Pink and Crystal Titanium Gold, both made from the same material.