Quick answer

Choose the 25 Dinse torch if your welder has a 3/8-inch Dinse socket and you prefer a standard gas fitting; choose the 35 Dinse flow-thru torch if your machine uses a 1/2-inch Dinse connection and you want gas routed through the power cable. Both are 150A air-cooled 17 Series torches.

Power connection: 25 Dinse vs 35 Dinse

The main difference is the power connector. The 25 Dinse uses a 3/8-inch outside diameter plug, while the 35 Dinse uses a 1/2-inch outside diameter plug. These are not interchangeable without an adapter, so check your welder’s socket before ordering.

A larger Dinse connector generally handles higher current, but both torches are rated at 150A. The choice is about matching your machine, not about getting more amperage.

Gas delivery: separate fitting vs flow-thru

The 25 Dinse torch has a separate 5/8-18 right-hand gas fitting, so you run a gas hose alongside the power cable. The 35 Dinse flow-thru torch routes gas through the power cable connection, which can simplify setup and reduce cable clutter.

Flow-thru systems require a compatible welder or adapter that supplies gas through the Dinse socket. If your machine does not support flow-thru gas, the 35 Dinse torch will not work without modification.

Cable flexibility and cold-weather use

Both torches use a one-piece cable made from flexible silicone rubber with a nylon braided overlay. The cable stays flexible in cold weather, which matters if you weld in an unheated shop or outdoors.

Key trade-offs

  • 25 Dinse with separate gas fitting: Requires a 3/8-inch Dinse socket and a separate gas hose to the 5/8-18 fitting. Works with most standard TIG setups and gives you independent control over gas hose routing. Check that your welder has a 3/8-inch Dinse socket and a standard gas outlet.
  • 35 Dinse flow-thru gas: Uses a 1/2-inch Dinse socket and routes gas through the power cable. Fewer hoses to manage, but only works if your welder supports flow-thru gas. Confirm your machine’s Dinse socket size and flow-thru capability before ordering.
  • Cable flexibility: Both torches share the same flexible silicone cable that stays supple in cold weather, so ergonomics are similar. Choose based on connection compatibility, not cable feel.

Product facts

Which torch fits your setup?

Best for

  • Welders with a 3/8-inch Dinse socket and standard gas fitting
  • Users who prefer a separate gas hose for easy routing or replacement

Not for

  • Machines with a 1/2-inch Dinse socket (choose the 35 Dinse model)
  • Setups that require gas through the power connection