What These Belts Are Built For
The 2 1/2x16 inch flexible aluminum oxide sanding belts from Red Label Abrasives are designed for both woodworking and non-ferrous metal sanding. Their open coat construction resists loading and static buildup, making them a practical choice for soft or hard woods, painted surfaces, plastics, composites, and metals. Each pack contains six belts, and they are available in grits from 60 to 400, so you can match the abrasive to the task.
Key Specifications at a Glance
-
2 1/2 X 16 Inch Flex Aluminum Oxide Wood & Non-Ferrous Sanding Belts, 6 Pack: 2 1/2x16” Flexible Aluminum Oxide Sanding Belts, 6 Pack. Open coat, anti-loading, anti-static. X-weight polyester/cotton blend backing. Dry use only. Available grits: 60, 80, 100, 120, 150, 180, 220, 320, 400. These specs confirm the belt's versatility for wood and non-ferrous tasks, while the dry-use limitation is critical for safe operation.
2 1/2 X 16 Inch Flex Aluminum Oxide Wood & Non-Ferrous Sanding Belts, 6 Pack
Choosing the Right Grit for Wood and Non-Ferrous
For woodworking, start with a coarse grit like 60 or 80 to remove material quickly on rough surfaces or shape contours. Move to 100 or 120 for general smoothing, and finish with 180 or 220 for a refined surface before painting or staining. On non-ferrous metals such as aluminum or brass, coarse grits (60–80) work for heavy stock removal, while 120–180 produce a decent finish. The belts' anti-loading stearate helps prevent clogging when sanding softer metals like aluminum.
Dry-Use Only and Other Limits
These belts are designed for dry applications only. The durable X-weight backing is not waterproof, so using them with water or coolant will damage the belt and reduce performance. Always operate in a dry environment. The bi-directional tape joint allows the belt to run in either direction, so you don't need to worry about arrow orientation when mounting.
Practical Tips for Belt Life
To get the most from your 2 1/2x16 belts, store them in a cool, dry place away from humidity. Since the belts are anti-static, they attract less dust during use, which helps maintain cutting efficiency. The J-weight polyester/cotton blend backing offers good flexibility for curved or detailed work on wood and non-ferrous parts. For general shop use, these belts are a solid all-around choice.
