What the PRL Flex-Fuel Kit Does for Your Accord
The PRL Motorsports WiFi Flex-Fuel / Ethanol Content Analyzer Kit lets you wirelessly monitor ethanol content on a smart device or send a 0.5–4.5V signal to your tuning device for automatic fuel mixture adjustment. Designed for the 2018–2022 Honda Accord 1.5T, it supports flex-fuel operation with ethanol blends like E30 or E85 without needing a separate gauge.
Kit Components at a Glance
-
2018-2022 Honda Accord 1.5T WiFi Ethanol Content Analyzer / Flex Fuel Kit: Includes billet aluminum Flex-Fuel Converter Case with sealed & potted WiFi board, genuine GM Continental ethanol content sensor, and billet stock-location EFI diverter fittings. All components are ethanol-compliant and designed to work with the factory fuel line, avoiding the need for aftermarket fuel line upgrades.
2018-2022 Honda Accord 1.5T WiFi Ethanol Content Analyzer / Flex Fuel Kit
Installation Steps and Key Checkpoints
The kit uses factory plugs and outputs under the hood, so no cutting, splicing, or running wires into the cabin is required. Follow these steps based on the supplied install guide.
- 1. Mount the converter and sensor: Use the included stainless mounting bracket and hardware to secure the billet converter case and GM ethanol sensor in a convenient under-hood location. The kit is designed for quick install and removal.
- 2. Connect the plug-and-play harness: The braided wiring harness connects directly to the factory ECU and power points. No additional wiring or fuse-box access is needed.
- 3. Attach the EFI diverter fittings to the factory fuel line: The kit utilizes the stock fuel line assembly. Do not replace it unless it is kinked or damaged. Note the 'Do Not Kink' warning on the line.
- 4. Configure the WiFi module: Use the WiFi module to wirelessly analyze ethanol content via a smart device. No ethanol content gauge is required.
- 5. (Optional) Set up tuning output: If using a tuning device (e.g., Hondata or KTuner), connect the optional 0.5–4.5V configurable output to enable automatic flex-fuel adjustments. KTuner V1.2 and Hondata offer Bluetooth display; KTuner V2 LCD can show ethanol content directly.
Fuel Line Compatibility and Care
The factory fuel line is constructed with an EPDM outer hose and an inner ETFE liner (similar to PTFE), making it highly resistant to ethanol-based fuels. The PRL kit is designed to work with this assembly and does not require an upgrade. However, the kit is NOT compatible with PRL PTFE Fuel Lines. Always inspect the stock line for kinks or damage before installation.
What the Catalog Does Not Confirm
The supplied information does not include specific torque values for mounting hardware, wiring diagrams beyond the plug-and-play harness, or step-by-step software setup for the WiFi module. For tuning integration details, refer to your tuning device's documentation. The kit's patent number (D1099164) is listed but does not affect installation procedure.
