What This Guide Covers

Adding a moonroof visor to your 2022+ Civic Hatchback is a practical upgrade that can reduce wind noise and glare while allowing you to keep the moonroof open in light rain. This guide explains what the Genuine Honda Moonroof Visor fits, what features the catalog confirms, and how to approach installation with the information available.

Product at a Glance

  • Genuine Honda 2023+ CR-V Moonroof Visor, Black: Fits all 2023+ Honda CR-V and all variant models including RHD, International Models, etc. Although originally listed for the CR-V, the same part number (08R01-3A0-100) may be compatible with the 2022+ Civic Hatchback moonroof. Always verify fitment with your dealer before purchasing.

    Genuine Honda 2023+ CR-V Moonroof Visor, Black

    Genuine Honda 2023+ CR-V Moonroof Visor, Black

  • Genuine Honda 2023+ CR-V Moonroof Visor, Black: Tinted acrylic is sturdy, attractive, long-lasting, and crack-resistant. The visor is built from durable acrylic that resists cracking, so it should hold up well to daily use and weather exposure.

  • Genuine Honda 2023+ CR-V Moonroof Visor, Black: Aerodynamic construction allows air to circulate through the cabin, even in inclement weather. You can leave the moonroof cracked open in light rain without worrying about water entering the cabin, which is the main reason many owners add a visor.

Compatibility Note

The Genuine Honda Moonroof Visor (part number 08R01-3A0-100) is listed for the 2023+ Honda CR-V. No official catalog evidence confirms fitment for the 2022+ Civic Hatchback. If you are considering this visor for your Civic, contact your Honda dealer to confirm compatibility before ordering. Some components and colors may vary, so verify that the visor matches your vehicle's moonroof dimensions.

General Installation Steps

The following steps are based on typical moonroof visor installation procedures. The catalog does not provide specific instructions for this part, so always refer to the included instructions or consult a professional installer.

  1. 1. Clean the moonroof opening: Thoroughly clean the area around the moonroof glass and the roof panel where the visor will attach. Use a mild detergent and allow the surface to dry completely.
  2. 2. Test fit the visor: Before removing any adhesive backing, place the visor on the moonroof to confirm alignment. The visor should sit flush against the glass and roof panel without gaps.
  3. 3. Apply the adhesive strips: Most moonroof visors use automotive-grade double-sided tape. Apply the tape to the visor's mounting points, then press firmly onto the vehicle's roof panel and moonroof glass. Hold each section as recommended in the product instructions to ensure adhesion.
  4. 4. Allow the adhesive to cure: Avoid washing the car or exposing the visor to heavy rain for the duration specified in the product instructions after installation. This gives the adhesive time to bond fully.
  5. 5. Check for secure fitment: After the curing period, gently tug on the visor to ensure it is firmly attached. If any edge lifts, reapply pressure or use a heat gun on low to soften the adhesive for a better bond.

What the Catalog Does Not Confirm

The catalog does not include installation instructions, torque values, or specific fitment details for the 2022+ Civic Hatchback. It also does not confirm whether the visor is compatible with all moonroof types or trim levels. For best results, consult your Honda dealer or a qualified installer. Installation cost is not included in the listed price.