What This Kit Includes and What You Need

The 3-Axis DRO Kit, Universal, Bluetooth from LittleMachineShop.com is designed to fit virtually any milling machine with less than 31.8" total X-, Y-, and Z-axis travel. The kit includes 1 meter (39.4") of magnetic scale that you cut to the lengths required for your machine, three read heads, and a Bluetooth transceiver. Note that this is not a simple plug-in accessory; it requires installation and some fabrication on your part.

You will also need an Android tablet with Bluetooth capability to use as the display. A 7" screen size is recommended. The tablet is not included in the kit. Review the installation instructions (Chris's Tips) before purchasing to understand the full scope of work.

Installation Steps

The following steps are based on the supplied kit contents and instructions. Always refer to the official documentation for your specific machine.

  1. 1. Measure Your Machine: Determine the travel distance for each axis (X, Y, Z) on your milling machine. The total combined travel must be less than 31.8".
  2. 2. Cut the Magnetic Scale: Using the instructions provided, measure and cut the magnetic scale to the lengths needed for each axis. The kit includes 1 meter (39.4") of scale, which you cut to fit.
  3. 3. Mount the Scale and Read Heads: Attach the magnetic scale to each axis. Then mount the read heads. Typical mounting bracket designs are included in the instructions, but appropriate brackets for your specific machine cannot be supplied due to the wide range of possible applications. You may need to fabricate or adapt brackets.
  4. 4. Connect the Bluetooth Transceiver: Connect the Bluetooth transceiver to the read heads as described in the instructions. Ensure the transceiver is powered and within range of your tablet.
  5. 5. Set Up the Android Tablet: On your Android tablet (with Bluetooth), install the required DRO app (not included). Pair the tablet with the Bluetooth transceiver. The tablet will then display the position data.

Kit Contents and Requirements

  • 3-Axis DRO Kit, Universal, Bluetooth: This magnetic technology digital readout package fits virtually any milling machine with less than 31.8" total X-, Y-, and Z-axis travel. Confirms this kit is suitable for your machine as long as total travel is under the limit.

    3-Axis DRO Kit, Universal, Bluetooth

    3-Axis DRO Kit, Universal, Bluetooth

  • 3-Axis DRO Kit, Universal, Bluetooth: This kit includes 1 meter (39.4") of magnetic scale that you cut to the lengths required for your machine. You must cut the scale yourself; the kit does not come pre-sized for your specific machine.

  • 3-Axis DRO Kit, Universal, Bluetooth: You must also get an Android tablet for the display on this DRO. We recommend a 7" screen size, and the tablet must have Bluetooth capability. The tablet is not included; you need to purchase it separately to use the DRO.

Important Considerations Before You Start

This kit is not a simple plug-in accessory. It requires measuring, cutting, and mounting the magnetic scale, as well as fabricating or adapting brackets for the read heads. The instructions include typical mounting bracket designs, but you may need to create custom brackets for your machine. Review the instructions in Chris's Tips before purchase to ensure you are comfortable with the installation process.

Also, note that the tablet display is not part of the kit. You will need an Android tablet with Bluetooth. A 7" screen size is recommended. Without the tablet, the DRO cannot display position data.