What the 3" HUMINT Build Means for Upkeep
The Half Face Blades 3" HUMINT is a compact fixed blade built for utility and everyday carry. Its 3-inch S45VN steel blade with an Armor Black Cerakote finish and a Black G10 handle with a textured grip gives you a practical tool that benefits from straightforward care. Knowing how the materials work together helps you keep the knife functional without guesswork.
Key Build Facts for the 3" HUMINT
-
3" HUMINT- Black G10, Armor Black Cerakote, Allen Bolts, Textured Grip: Blade steel: S45VN American steel for reliable edge retention. S45VN holds an edge well but still needs periodic cleaning and light oiling to prevent corrosion, especially after cutting moist or acidic materials.
3" HUMINT- Black G10, Armor Black Cerakote, Allen Bolts, Textured Grip
-
3" HUMINT- Black G10, Armor Black Cerakote, Allen Bolts, Textured Grip: Finish: Armor Black Cerakote on the blade for a durable, low-reflective surface. Cerakote resists wear and corrosion, but abrasive cleaners or scrubbing pads can damage the coating. Stick to mild cleaning methods.
-
3" HUMINT- Black G10, Armor Black Cerakote, Allen Bolts, Textured Grip: Handle: Black G10 with a textured grip for secure handling. G10 is tough and moisture-resistant, but the texture can trap dirt and oils. Regular cleaning keeps the grip effective.
-
3" HUMINT- Black G10, Armor Black Cerakote, Allen Bolts, Textured Grip: Hardware: Allen bolts for a clean, secure assembly. Allen bolts allow you to disassemble the knife for thorough cleaning if needed, but avoid over-tightening to prevent stripping.
How to Clean the Textured G10 Handle
The textured Black G10 handle gives you a secure grip, but the texture can collect debris. A simple cleaning routine keeps it grippy and looking good.
- Step 1: Wipe down after use: Use a soft, damp cloth to remove loose dirt and oils from the G10 surface. Avoid soaking the handle; G10 is moisture-resistant, but excess water can get into the hardware area.
- Step 2: Clean the texture: For stubborn grime, use a soft-bristled brush (like an old toothbrush) with mild soapy water. Gently scrub the textured areas to dislodge debris, then wipe with a clean damp cloth.
- Step 3: Dry thoroughly: Pat the handle dry with a lint-free cloth. Let it air-dry completely before storing to prevent moisture from sitting around the Allen bolts.
Caring for the Armor Black Cerakote Blade
The Cerakote finish is durable but benefits from gentle care to maintain its low-reflective appearance and corrosion resistance.
- Step 1: Rinse and wipe: After cutting, rinse the blade with clean water if it contacted salt, sweat, or acidic foods. Wipe dry immediately with a soft cloth.
- Step 2: Use mild cleaners only: Clean the blade with a damp cloth and mild dish soap if needed. Avoid abrasive pads, bleach, or harsh solvents that can wear the Cerakote.
- Step 3: Light oil for the steel: Apply a thin coat of food-safe mineral oil or a quality knife oil to the exposed S45VN steel at the edge. This protects the steel without affecting the Cerakote finish.
Allen Bolt Checkpoints
The 3" HUMINT uses Allen bolts for a clean assembly. If you ever disassemble the knife for deep cleaning, use the correct Allen wrench size and avoid over-tightening when reassembling. A light application of thread-locker (medium strength) on the bolts can keep them secure without making future disassembly difficult. The supplied information does not specify the exact wrench size, so check fitment before applying torque.
Storage and Sheath Habits
The knife comes with a Kydex sheath for safe carry. Store the knife in a dry environment, away from humidity. If you store it for extended periods, keep a light oil film on the blade edge and ensure the handle is clean and dry. Avoid storing the knife in the sheath while wet, as trapped moisture can affect both the blade and the sheath fit.
