What the 4G Dimmer 120W Cross Steel Includes
The 4G Dimmer 120W Cross Steel is a 2-gang (2G) wall plate that holds four rotary dimmer modules, making it a quadruple dimmer switch. It comes as a kit: a brushed solid steel plate, four dimmer modules, and a detail kit with a cross-knurled knob, solid metal collar nuts, and coin screws. The components arrive in separate boxes, so unbox everything before you start.
Catalog Evidence for the 4G Dimmer Cross Steel
-
4G DIMMER / 120W / CROSS / STEEL: A 2G 120W quadruple dimmer switch made from solid metal with a steel finish. It features a brushed solid metal plate, four rotary dimmer modules and a detail kit with our signature cross-knurled dimmer knob, solid metal collar nuts and coin screws. Confirms the plate is 2-gang (not 4-gang) and that the kit includes all necessary hardware for a complete installation.
4G DIMMER / 120W / CROSS / STEEL
-
4G DIMMER / 120W / CROSS / STEEL: This dimmer is part of our Custom Switches + Sockets collection, which can be customised in the years to come functionally and aesthetically. Simply switch out the modules, or change the look with one of our detail kits. Highlights that future module swaps or detail kit changes are supported, so the installation should allow easy access to the back box.
Installation Steps for the 4G Dimmer Cross Steel
Always consult a licensed electrician if you are unsure about any step. The catalog states: 'See tech spec for more information and, if in doubt, always consult a licensed electrician.'
- 1. Prepare the back box: Use a 2-gang metal back box that is deep enough to house four dimmer modules and wiring. The plate is designed for a standard UK 2-gang box. Ensure the box is securely fixed to the wall and the cables are long enough to reach the modules.
- 2. Connect the dimmer modules: Each rotary dimmer module controls one lighting circuit (up to 120W total per module). Follow the wiring diagram supplied with the module (not included in the catalog evidence). Typically, connect the live, neutral, and switched live wires per module. Use the supplied solid metal collar nuts to secure each module to the plate.
- 3. Mount the plate: Fit the brushed steel plate over the back box using the supplied coin screws. The plate is solid metal, so avoid overtightening to prevent distortion. Ensure the plate sits flush against the wall.
- 4. Attach the dimmer knobs: Push the cross-knurled dimmer knobs onto the module spindles. They are designed for a friction fit; no tools are needed. Test each knob rotates smoothly through its full range.
Wiring Checkpoints for a Four-Gang Setup
Because the 4G Dimmer Cross Steel controls four separate circuits, labeling each cable before disconnecting the old switch is essential. The catalog does not specify wire colors or a specific wiring diagram, so rely on your local regulations and the module's own instructions. A common approach is to connect each dimmer module to its own circuit, ensuring the total load per module does not exceed 120W. If you are replacing an existing four-gang switch, photograph the existing wiring for reference.
What the Supplied Information Does Not Settle
The catalog does not include a wiring diagram, maximum wire size, or torque settings for the terminal screws. It also does not specify whether the dimmer modules are leading-edge or trailing-edge, or if they are compatible with LED loads. For these details, refer to the technical specification sheet that ships with the product, or consult a licensed electrician. The steel finish is available in STEEL and BRASS variants; the installation steps are identical for both.
