Two 4x6 paths, one decision

If you're shopping for a 4x6 speaker upgrade, you'll likely encounter two distinct designs: a coaxial speaker that combines a woofer and tweeter in one frame, and a dedicated bullet loudspeaker designed for direct, high-efficiency midrange and treble. Both fit the same 4x6 footprint, but they serve different system roles. This comparison looks at the DS18 ZXI-464 coaxial and the DS18 PRO-FR46NEO bullet loudspeaker to help you decide which fits your build.

At a glance: two 4x6 options

  • ZXI 4x6" 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm: DS18 ZXI-464: 4x6" 2-way coaxial, 60W RMS / 180W max, 4 ohms, 87dB sensitivity, 80Hz–20kHz frequency response, glass fiber cone. This is a full-range coaxial you can run without a separate tweeter. The 2-way design covers bass to high frequencies from one speaker, simplifying installation in factory locations.

    ZXI 4x6" 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm

    ZXI 4x6" 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm

  • PRO 4x6" Neodymium Full-Range Bullet Loudspeaker 150 Watts Rms 4-Ohm: DS18 PRO-FR46NEO: 4x6" full-range bullet loudspeaker, 150W RMS / 300W max, 4 ohms, 95dB sensitivity, 125Hz–20kHz frequency response, neodymium magnet, aluminum bullet. The bullet driver delivers a more direct, focused sound with higher sensitivity. It's designed for systems where you want loud, clear midrange and treble, but you'll need a separate subwoofer or mid-bass driver for frequencies below 125Hz.

    PRO 4x6" Neodymium Full-Range Bullet Loudspeaker 150 Watts Rms 4-Ohm

    PRO 4x6" Neodymium Full-Range Bullet Loudspeaker 150 Watts Rms 4-Ohm

Power handling and sensitivity

The ZXI-464 handles 60W RMS and has 87dB sensitivity. That's a moderate power rating suited to factory head units or small amplifiers. The PRO-FR46NEO, on the other hand, is rated for 150W RMS with 95dB sensitivity — a significant jump in both power handling and efficiency. The 8dB sensitivity difference means the bullet speaker will play noticeably louder with the same amplifier power. If you're building a system that prioritizes volume and you have an amp to match, the PRO-FR46NEO gives you more headroom.

Frequency range and system integration

The ZXI-464 extends down to 80Hz, which means it can reproduce some bass — useful if you don't have a subwoofer yet. Its 2-way coaxial design includes a tweeter for highs, so it's a self-contained solution for a full-range front stage. The PRO-FR46NEO starts at 125Hz, so it won't produce deep bass. It's meant to be paired with a subwoofer or dedicated mid-bass driver. The trade-off is that the bullet driver's narrower dispersion can give you a more direct, less reflected sound, which some listeners prefer for clarity at high volumes.

ZXI-464 coaxial vs PRO-FR46NEO bullet: key differences

  • Design type: ZXI-464 is a 2-way coaxial with a separate tweeter; PRO-FR46NEO is a full-range bullet driver with a single diaphragm.
  • Power handling (RMS): ZXI-464: 60W; PRO-FR46NEO: 150W. The bullet speaker needs and can handle more amplifier power.
  • Sensitivity: ZXI-464: 87dB; PRO-FR46NEO: 95dB. The bullet speaker will play much louder per watt.
  • Frequency response: ZXI-464: 80Hz–20kHz; PRO-FR46NEO: 125Hz–20kHz. The coaxial covers more bass; the bullet requires a subwoofer for low frequencies.
  • Sound character: ZXI-464 provides a wide, balanced soundstage; PRO-FR46NEO delivers a direct, focused beam of sound — better for high-volume clarity.
  • Installation complexity: ZXI-464 fits a standard 4x6 location with no additional crossover needed. PRO-FR46NEO may require a high-pass filter and a subwoofer for a full-range system.

Which one fits your build?

Choose the ZXI-464 coaxial if you want a straightforward 4x6 upgrade that plays full-range from a single speaker, especially if you're using a factory radio or a small amp. Its 60W RMS rating and 87dB sensitivity make it a balanced choice for daily listening where you don't need extreme volume. The glass fiber cone and 2-way design provide a solid foundation for a mid-tier system.

Choose the PRO-FR46NEO bullet loudspeaker if you're building a system where loud, direct sound is the priority. Its 150W RMS handling, 95dB sensitivity, and aluminum bullet driver are designed for high-output applications. You'll need a subwoofer to cover the bass, but the trade-off is a speaker that can keep up with powerful amplifiers and cut through road noise. The neodymium magnet keeps it lightweight for custom enclosures or tight mounting locations.