Start with the model name on your camera
A dash cam that drops from the windshield usually needs one of two things: a fresh adhesive layer or a replacement mount. Before you order either, confirm the exact model printed on your 70mai camera. The replacement pack covered here is listed for the Dash Cam A500S, A510, A200, and A410 only.
That model check is the first checkpoint in any dash cam mount replacement guide. If your camera is not one of those four, this pack is not confirmed to fit, and you should look for the mount listed for your specific model instead.
What the replacement pack contains
-
70mai Mount and Adhesive Stickers for Dash Cam A500S/ A510/ A200/ A410: Full-equipped replacement pack for Dash Cam A500S/ A510/ A200/ A410, perfectly replaces the worn-out parts of your dash cam The pack is designed as a direct replacement for worn mounting parts on these four models, not a universal dash cam mount.
70mai Mount and Adhesive Stickers for Dash Cam A500S/ A510/ A200/ A410
-
70mai Mount and Adhesive Stickers for Dash Cam A500S/ A510/ A200/ A410: Package includes: Electrostatic stickers x2, Heat resistant adhesives x2, Mount x1 You get two electrostatic stickers, two heat-resistant adhesives, and one mount, so you can plan the reattachment without ordering separate pieces.
How to approach the reattachment
The supplied product information confirms what is in the pack and which models it is for, but it does not include surface preparation steps, curing times, or removal instructions. Use the steps below as a planning framework, and follow any instructions that come with the product or your dash cam.
- Confirm your camera model: Check that your dash cam is an A500S, A510, A200, or A410. This pack is listed only for those models.
- Inspect the old mount and adhesive: Identify whether the mount itself is worn or whether only the adhesive layer has failed. The pack includes both a mount and fresh adhesives, so you can replace the worn parts together.
- Plan for the electrostatic sticker and adhesive: The pack includes two electrostatic stickers and two heat-resistant adhesives. The supplied information does not specify the exact order or method for applying them, so refer to the product or camera instructions for the application sequence.
- Choose a mounting spot before applying anything: Decide where the camera will sit on the windshield before you commit the adhesive. The supplied information does not include recommended placement distances or angles, so position the camera where it gives you the view you need without obstructing your driving view.
- Keep the spare parts together: With two stickers and two adhesives, you have a spare set for a future reattachment. Store the extras somewhere clean and dry.
Why heat-resistant adhesive matters for a windshield mount
A dash cam sits in one of the harshest spots in a car: direct sun through the windshield. The adhesive in this pack is described as heat resistant, which is relevant when a camera falls off in warm weather. The supplied information does not state a temperature rating or a guaranteed service life, so treat heat resistance as a described feature rather than a promise about how long the adhesive will last.
If your camera has already fallen off more than once, check whether the old adhesive residue is the problem before applying a new sticker. The supplied information does not include a cleaning procedure, so use a method you are confident is safe for your windshield and follow the product instructions.
When this pack is the right fix — and when it is not
This is a model-specific replacement pack, not a one-size-fits-all solution. Use the comparison below to decide whether it matches your situation.
- Right fix: your A500S, A510, A200, or A410 mount is worn: The pack is listed as a full-equipped replacement for these four models and includes a mount, two electrostatic stickers, and two heat-resistant adhesives.
- Right fix: your camera fell off and the adhesive failed: Fresh heat-resistant adhesives and electrostatic stickers are included, so you can replace the failed layers rather than reusing old ones.
- Not confirmed: a different 70mai model: The supplied information lists only the A500S, A510, A200, and A410. For any other model, this pack is not confirmed to fit.
- Not confirmed: a different brand of dash cam: The pack is described specifically for 70mai Dash Cam models. The supplied information does not confirm compatibility with other brands.
What to check before you order
Before buying, read the model name on your camera and compare it with the four models listed for this pack. If the name matches, the pack gives you a mount, two electrostatic stickers, and two heat-resistant adhesives at a catalog price of USD 7.39, compared with a catalog comparison price of USD 9.99.
If the name does not match, do not order this pack on the assumption that it will fit. The supplied information does not include adapter options or cross-model compatibility beyond the four listed cameras. In that case, search for the mount listed for your specific 70mai model.
