What Is the 8" Solid One Shank PSA Disc?
The 8" Solid One Shank PSA Disc from Supergrit Abrasives is a single-shank abrasive accessory built with a pressure-sensitive adhesive (PSA) backing. Its 5/16"-24 threaded mount lets you attach it directly to compatible sanding or finishing tools, giving you a rigid, centered sanding face for consistent results.
The "solid one-shank" design means the disc has a single, sturdy shaft that threads into the tool, keeping the disc stable during use. The PSA backing holds the abrasive disc firmly in place without needing clips or hook-and-loop attachment.
Product Specifications at a Glance
-
8" SOLID ONE SHANK 5/16"-24 THREAD PSA: 8 inch diameter, solid one-shank design with 5/16"-24 thread for mounting. The 8" size is a common choice for larger surface sanding, and the 5/16"-24 thread is a standard mount for many right-angle grinders and sanding tools. The single-shank construction provides a rigid platform for the disc.
8" SOLID ONE SHANK 5/16"-24 THREAD PSA
-
8" SOLID ONE SHANK 5/16"-24 THREAD PSA: PSA (pressure-sensitive adhesive) backing. PSA backing allows you to quickly attach and replace abrasive discs without tools or additional adhesive. The adhesive holds securely during use but peels off cleanly when you need to change grits.
-
8" SOLID ONE SHANK 5/16"-24 THREAD PSA: Single-shank construction, SKU: 16800-PSAS (Standard option). The single-shank design is simpler and often more affordable than multi-shank or interface-pad setups. It works well for general sanding tasks where you need a direct, stable connection.
How to Set Up the 8" Solid One Shank PSA Disc
Follow these steps to mount the shank and apply the PSA disc. Always check your tool's compatibility with a 5/16"-24 thread before starting.
- 1. Check tool compatibility: Ensure your sanding tool or grinder has a 5/16"-24 threaded spindle. This thread size is common on many right-angle grinders and dedicated sanding tools. Do not force the shank onto a different thread size.
- 2. Thread the shank onto the tool: Screw the 8" Solid One Shank onto the tool's threaded spindle by hand until snug. Use the tool's spindle lock (if available) to hold the shaft while you tighten it lightly with a wrench. Avoid overtightening.
- 3. Prepare the PSA disc: Peel the backing paper from the PSA disc to expose the adhesive. Keep the disc clean and free of dust or oil before application.
- 4. Center the disc on the shank face: Press the disc onto the shank's flat face, starting from the center and working outward to avoid air bubbles. Apply firm, even pressure across the entire disc surface.
- 5. Let the adhesive set: For best adhesion, wait a few minutes before starting the tool. The PSA bond strengthens with time and pressure.
Application Tips for Best Results
The 8" Solid One Shank PSA disc works well for flat or gently curved surfaces. Because the shank is rigid, avoid heavy side pressure that could stress the threaded connection. Use a light to moderate sanding pressure and let the abrasive do the work.
When switching grits, peel off the used PSA disc and apply a fresh one. If the adhesive leaves residue, clean the shank face with a mild solvent before applying the next disc. Store unused PSA discs in a cool, dry place to keep the adhesive effective.
