The label check comes before anything else

Before you order a replacement adjustable side for your Sebra Sengen, Baby & Jr., look for two labels on your existing crib: the EU Ecolabel and the FSCTM mark. The spare part is only guaranteed to fit Sebra products that carry both labels. If your crib does not have them, the supplier cannot guarantee a match or help with other spare parts.

This check matters because the adjustable side is a structural part of the crib. A side that does not fit correctly is not a cosmetic issue; it affects how the crib goes together. So start by confirming the labels, not by measuring the old part.

What the adjustable side spare part is

How to approach fitting the adjustable side

The supplied product information does not include step-by-step fitting instructions or tool requirements. The assembly guide is the correct source for those details. The steps below describe how to prepare, not how to perform the physical installation.

  1. Locate your crib's assembly guide: The guide shows which parts are used where and how they are mounted. Keep it with you during the job.
  2. Confirm you have part D: The adjustable side is labeled part D. Check the part marking before you begin.
  3. Check the labels on your crib: The spare part is only guaranteed for cribs with both the EU Ecolabel and FSCTM marks.
  4. Follow the guide for installation: Do not improvise fastening or adjustment. The supplied information does not describe the fitting procedure beyond referring to the assembly guide.

When replacing the side is the right move

The supplied information does not list symptoms that indicate a worn or damaged adjustable side, so there is no official checklist for when to replace it. What the information does make clear is the compatibility condition: the replacement is intended for Sebra Sengen, Baby & Jr. cribs with both labels. If your crib meets that condition and you have identified the adjustable side as the part you need, this spare part is the matching component.

If you are unsure whether the adjustable side is the part causing your problem, the assembly guide can help you identify part D and see how it relates to the rest of the crib. The guide is also the place to confirm that no other parts are involved in the issue you are trying to solve.

What you can and cannot confirm from the supplied information

  • Confirmed: Part D is the adjustable side for Sebra Sengen, Baby & Jr.; it carries the EU Ecolabel and FSCTM marks; fitting details are in the assembly guide; compatibility requires both labels on your crib.
  • Not confirmed: The supplied information does not include load limits, tools needed, step-by-step fitting instructions, care instructions, or a list of fault symptoms. For those details, consult the assembly guide or the manufacturer's documentation.

A note on price and what you are buying

The adjustable side is listed at USD 414.00, with a catalog comparison price of USD 600.00. That is a significant amount for a single spare part, which makes the label check even more important. Ordering the wrong side because your crib lacks the required labels would be an expensive mistake.

The part is marked with the EU Ecolabel and FSCTM, which tells you it meets those certification schemes. The supplied information does not go into further detail about materials or construction beyond those marks.