What the Adjustable Spray Irrigation Kit covers

The Adjustable Spray Irrigation Kit is built for medium to larger sized garden and veggie beds. It includes ten 360° spray heads, each fully adjustable, so you can tailor the coverage to match your planting area. The 360° spray pattern applies water evenly across the entire spray area, which is important for uniform water coverage and making sure the entire root ball gets watered.

Kit contents and key features

  • Adjustable Spray Irrigation Kit: The kit includes everything you need to set up a basic irrigation system, from spray heads and joiners to tubing and pressure regulators. It removes the guesswork of sourcing individual parts, making it a practical starting point for first-time installers.

    Adjustable Spray Irrigation Kit

    Adjustable Spray Irrigation Kit

  • Adjustable Spray Irrigation Kit: Each spray head can be adjusted to cover a diameter of between 0 - 3.5 meters. You can match each head's reach to the exact width of your bed or border, avoiding dry patches or overspray onto paths.

  • Adjustable Spray Irrigation Kit: The heads will 'click' as they are rotated, with 22 clicks from closed to fully open. The tactile feedback lets you set flow precisely without guessing, and you can repeat the same setting on multiple heads.

Adjusting coverage for your garden shape

Because roots of most plants extend well beyond the visible plant, it is important to water the entire root zone. With the Adjustable Spray Kit, you can rotate each head to control the amount of water and coverage. The 22-click range from closed to fully open allows fine-grained adjustment, so you can dial in a light mist for seedlings or a full soak for established plants.

The 360° pattern ensures water is applied evenly across the entire spray area. If your bed is irregularly shaped, you can space the heads to eliminate gaps by adjusting the diameter of each spray head individually.

What to consider before buying

  • Water usage: The adjustable spray heads use the most water per hour of all the kits, making them great for thirstier plants or when watering times are restricted. This higher water usage is something to be mindful of if you are using tank water.
  • Expanding the system: If needed, the kit can be expanded with additional heads, joiners and lines as your garden grows. A full list of additional parts is available on the store's comparison page.
  • Water source compatibility: If you are using the kit with tank or bore water, an In-Line Filter is recommended to protect the spray heads from debris.

Setup tips for even coverage

Start by laying out the tubing along the center of your bed, then position each spray head where it can reach the edges without overlapping too much. Adjust each head from closed to the desired flow using the clicks as a guide. Test the system with a short run to see if any areas are missed, then fine-tune the head positions or diameter settings. The kit is made in Australia from durable, UV-stabilised materials, so it should hold up well year after year.