Confirm your RMS-18/20 hardware first
The D24-10T reload kit is part of the AeroTech Reloadable Motor System (RMS), which means it is not a ready-to-fly motor. You will need AeroTech RMS-18/20 motor hardware to assemble the reload into a complete motor. That hardware is sold separately, either as a complete set or as individual parts, so check what you already own before ordering the reload kit.
The reload kit itself includes three rocket motor reloads, all internal motor components, and FirstFire Initiators. The motor diameter is 0.70 inches (18mm) and the casing length is 2.75 inches (70mm), which matches the RMS-18/20 hardware. If you have a different RMS case size, this kit will not fit.
D24-10T reload kit at a glance
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: The AeroTech motor reload kit comes with 3 rocket motor reloads. You get three flights per kit, so factor that into your launch planning.
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Reload kits include all internal motor components and FirstFireTM Initiators. You do not need to source separate internal parts or igniters for each reload.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Hardware Required: RMS-18/20 This is the specific hardware set you must have before assembly.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Total Impulse: 20 N-sec This is the total energy the motor delivers, useful for comparing with other reloads.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Average Thrust: 14.8 newtons Average thrust gives a sense of the motor's overall push.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Peak Thrust: 25.5 N-sec Peak thrust indicates the maximum force during the burn.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Thrust Duration: 1.22 seconds A short burn means quick acceleration, so your rocket needs to be ready for it.
-
AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Delay Time: 10 seconds The delay is fixed at 10 seconds, so you need to match it to your rocket's coast time.
Match the 10-second delay to your rocket
The D24-10T has a 10-second delay, which is not adjustable out of the box. That delay determines when the ejection charge fires after the thrust phase ends. If your rocket coasts for significantly less or more than 10 seconds, the delay may be too long or too short for a safe deployment.
The supplied information does not include a delay-adjustment procedure or a delay kit for this reload. If you need a different delay, you would need to choose a different reload kit with a different delay time, or check whether a separate delay kit exists for RMS-18/20. The catalog does not confirm a specific delay kit for this motor, so verify before relying on one.
Checkpoints before you assemble
- Hardware compatibility: Confirm you have RMS-18/20 hardware. Mid Power RMS reload kits are not compatible with High Power RMS products, so do not try to use this reload in a high-power case.
- Component inventory: Open the kit and verify you have all internal motor components and the FirstFire Initiators. The kit includes three reloads, so you can inventory each set.
- Motor dimensions: The assembled motor will be 18mm in diameter and 70mm long. Check that your motor mount and retainer can accept that size.
- Age and shipping requirements: This motor is U.S. mailable with no hazmat fee, but orders containing it will not ship until proof of age (such as a copy of a driver’s license) is received. The sale of this high power motor to persons under 18 is prohibited by federal law.
What the catalog does not cover
The supplied information does not include step-by-step assembly instructions for the D24-10T reload. AeroTech RMS reloads are assembled by the user, and the kit includes the internal components, but the exact sequence for inserting the propellant, delay, and initiator is not detailed here. For assembly guidance, refer to AeroTech’s official instructions or the documentation included with your hardware set.
Also, AeroTech/Quest does not list recommended maximum lift-off weights for mid-power and high-power motors due to variables involved. You will need to rely on simulation software such as RockSim or OpenRocket to estimate performance for your specific rocket. The catalog suggests these tools but does not provide a recommended weight range.
Finally, the catalog does not specify a required motor retainer or mounting method for the RMS-18/20 hardware. Check your rocket’s motor mount design and the hardware set’s instructions to ensure proper retention.
Certifications and propellant character
- AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR) and the Canadian Association of Rocketry (CAR). These certifications indicate the motor has been tested to recognized safety standards.
- AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: The RMS motor reload utilizes RCSs exclusive Blue ThunderTM aerospace grade composite propellant formulation, which produces a gorgeous bright violet-blue flame with a minimum of exhaust smoke. The propellant type affects the visual effect and smoke output, which may matter for spectators or photography.
- AeroTech D24-10T RMS-18/20 Reload Kit (3 Pack) - 42410: Blue ThunderTM motors provide a higher level of thrust than White LightningTM motors of the same total impulse and are perfect for high lift-off acceleration. This helps you understand the performance character compared to other propellant types.
Ordering and shipping practicalities
The D24-10T reload kit is listed at USD 21.73, with a catalog comparison price of USD 31.49. It ships within the U.S. without a hazmat fee, but the age-verification requirement means you should allow extra time for order processing. Have your proof of age ready to submit when you order so your shipment is not delayed.
Because the kit contains three reloads, you may want to order additional kits if you plan multiple flights. The reloads are specific to RMS-18/20 hardware, so keep them with your hardware set to avoid mixing them up with other reloads.
