What the AeroTech F40-7W Reload Kit Contains

The AeroTech F40-7W RMS-29/40-120 reload kit (product ID 886514) is a single-use reload for the reusable RMS-29/40-120 motor hardware system. It uses AeroTech's White Lightning™ propellant, which produces a bright white flame and dense white smoke. Each kit includes one reload with all internal components and a FirstFire™ Initiator for ignition. You will need the separately sold RMS-29/40-120 motor hardware (casing, closures, and nozzle) to assemble a complete motor.

Assembly Steps for the F40-7W Reload

Assemble the reload into your RMS-29/40-120 hardware. Follow these general steps, consulting the supplied instructions for torque values and specific order.

  1. Prepare the hardware: Ensure your RMS-29/40-120 casing, forward closure, aft closure, and nozzle are clean and undamaged. The reload kit components will fit inside this specific hardware set.
  2. Insert the propellant grain: Place the propellant grain (40 grams) into the casing. The reload kit includes O-rings and spacers; position them as shown in the instructions to seal the grain.
  3. Install the delay element: The F40-7W has a 7-second delay. Insert the delay element into the forward closure. Ensure it is seated correctly for proper ejection timing.
  4. Add the FirstFire™ Initiator: The kit includes a FirstFire™ Initiator. Insert it into the nozzle end, ensuring it contacts the propellant. Secure per the instructions.
  5. Assemble the closures: Thread the forward and aft closures onto the casing. Tighten to the recommended torque. The motor is now ready for installation in your rocket.

Understanding the F40-7W Delay Selection

The "7W" in the name indicates a 7-second delay after burnout before the ejection charge fires. This delay is fixed; you cannot adjust it without a separate delay adjustment tool (not included). Choose this delay for rockets that need a longer coast time after boost. For rockets with a shorter optimal delay, consider a different reload variant. Always simulate your rocket's flight using software like RockSim or OpenRocket to confirm the delay matches your rocket's weight and altitude.

Key Specifications for the F40-7W Reload

  • AeroTech F40-7W RMS-29/40-120 Reload Kit (1 Pack) - 64007: Total Impulse: 78.1 N-sec, Average Thrust: 37.9 newtons, Peak Thrust: 68.1 N-sec, Thrust Duration: 2.1 seconds, Delay Time: 7 seconds. These numbers help you select a rocket that can handle the thrust and determine the correct delay for safe recovery.

    AeroTech F40-7W RMS-29/40-120 Reload Kit (1 Pack) - 64007

    AeroTech F40-7W RMS-29/40-120 Reload Kit (1 Pack) - 64007

  • AeroTech F40-7W RMS-29/40-120 Reload Kit (1 Pack) - 64007: Motor Diameter: 1.125 inches (29mm), Casing Length: 4.875 inches (124mm), Propellant Weight: 40 grams, Motor Weight: 126.1 grams. Ensures compatibility with your rocket's motor mount tube and helps calculate total lift-off weight.

  • AeroTech F40-7W RMS-29/40-120 Reload Kit (1 Pack) - 64007: Certified by TRA, NAR, and CAR. This reload meets the safety standards of major rocketry organizations, important for club launches and insurance.

The AeroTech F40-7W is a mid-power reload (not high power), but it still requires age verification. Orders will not ship until proof of age (e.g., driver's license) is received. Federal law prohibits sale to persons under 18. Always follow your local club's safety code and use a launch system rated for 29mm motors. The manufacturer does not list a maximum lift-off weight; use simulation software to determine safe limits for your rocket.