Choosing Between Two 54mm Closures

When assembling an AeroTech RMS-54 high-power motor, the closures you choose affect how the reload kit fits and performs. The two main options are the RMS-54 Aft Closure (54ACC) and the Extended Forward Closure (54FCE). Both are designed for use with all AeroTech RMS-54 high-power motor reload kits, but they serve different positions in the motor assembly.

Your choice depends on whether you need a standard aft closure or an extended forward closure for your specific reload kit configuration. Let's look at what each offers and how to decide.

Closure Basics

  • AeroTech RMS-54 54mm Aft Closure - 54ACC: For use with all AeroTech RMS-54 high power motor reload kits. Motor reloads sold separately. The 54ACC is the standard aft closure for 54mm cases. It seals the rear of the motor and is required for any RMS-54 reload.

    AeroTech RMS-54 54mm Aft Closure - 54ACC

    AeroTech RMS-54 54mm Aft Closure - 54ACC

  • AeroTech RMS-54 54mm Extended Forward Closure - 54FCE: For use with all AeroTech RMS-54 high power motor reload kits. Motor reloads sold separately. The 54FCE is an extended forward closure that provides additional space in the forward end of the motor, useful for certain reload designs that need more volume.

    AeroTech RMS-54 54mm Extended Forward Closure - 54FCE

    AeroTech RMS-54 54mm Extended Forward Closure - 54FCE

Key Differences at a Glance

  • Position in Motor: The 54ACC is the aft (rear) closure, while the 54FCE is the forward closure. They are not interchangeable in position.
  • Design Purpose: The 54ACC is the standard rear seal. The 54FCE is an extended version that adds length forward, accommodating reload kits with longer propellant grains or special configurations.
  • Compatibility: Both work with all AeroTech RMS-54 high-power reload kits. However, the 54FCE may be required or recommended for certain reloads; always check the reload instructions.
  • Price: The 54FCE (catalog price USD 47.44) is slightly more expensive than the 54ACC (catalog price USD 43.54), reflecting its extended design.

Which Closure Should You Choose?

Start by checking the instructions for your specific AeroTech RMS-54 reload kit. Some reloads specify the extended forward closure (54FCE) for proper fit and performance. Others work with a standard forward closure (not shown here) and the aft closure (54ACC).

If you are building a motor from a reload kit that calls for an extended forward closure, the 54FCE is the right choice. For most standard 54mm reloads, the 54ACC aft closure is required, and you will pair it with a compatible forward closure from your hardware set.

Remember: High-power RMS reload kits are not compatible with Mid Power RMS products. Always verify that your hardware matches the reload kit's specifications.

Compatibility Reminder

  • AeroTech RMS-54 54mm Extended Forward Closure - 54FCE: Important: High Power RMS reload kits are not compatible with Mid Power RMS products. Even if the closures fit physically, using them with the wrong power class can be unsafe. Only use these closures with RMS-54 high-power reload kits.
  • AeroTech RMS-54 54mm Aft Closure - 54ACC: Important: High Power RMS reload kits are not compatible with Mid Power RMS products. The same warning applies to the aft closure. Always confirm your reload kit is labeled for high power use.