What the Strong-Arm Decal Sheet Is For
The AeroTech Strong-Arm Decal Sheet (item 18017) is the same self-adhesive decal sheet supplied with the Enerjet by AeroTech Strong-Arm rocket kit. It provides the markings needed to add scale-style detail to your model.
Because it is self-adhesive, you do not need water, heat, or setting solutions. The sheet is designed for use with the Strong-Arm rocket or similar projects, so the markings match the kit's original placement.
Step-by-Step Application
- Prepare the surface: Make sure the area where you will apply the decal is clean, dry, and free of dust or oils. A smooth painted or bare surface works best for self-adhesive decals.
- Cut out the desired decal: Use scissors or a hobby knife to cut the specific marking you want from the sheet. Leave a small border of clear carrier film to help with positioning.
- Peel and position: Carefully peel the decal from the backing paper. Place it on the rocket in the approximate location. Do not press down yet—you can slide it slightly while the adhesive is still exposed.
- Burnish and set: Once aligned, press the decal firmly from the center outward using a soft cloth or your finger. This removes air bubbles and ensures full adhesion.
- Let it cure: Allow the decal to set for at least a few hours before handling or applying a clear coat. The adhesive bond strengthens over time.
Placement Tips for the Strong-Arm
The decal sheet is identical to the one included in the Strong-Arm kit, so the markings are sized for that rocket's body tube and fins. If you are using it on a different model, measure the available space before cutting. For best results, apply decals after the rocket is fully painted and before you add any final clear coat.
Product Details
-
AeroTech Strong-Arm™ Decal Sheet - 18017: This AeroTech Strong-Arm Decal Sheet is the same self-adhesive decal sheet supplied with the Enerjet by AeroTech Strong-Arm rocket kit. Confirms that the markings are an exact match for the kit, so placement guides from the kit instructions apply directly.
AeroTech Strong-Arm™ Decal Sheet - 18017
-
AeroTech Strong-Arm™ Decal Sheet - 18017: Self-adhesive decal sheet for easy application. No water or heat needed, which simplifies the process and reduces the risk of damage to paint or decal.
What the Catalog Does Not Tell You
The supplied information does not include a diagram of where each decal goes on the Strong-Arm rocket, nor does it specify the exact adhesive type or cure time. If you are building the kit from scratch, refer to the original Strong-Arm kit instructions for placement. For custom projects, test-fit the decals with low-tack tape before committing.
