Strong-Arm basics: skill, size and what's in the box

What skill level is the Strong-Arm, and who is it for?

The Strong-Arm is an Enerjet Skill Level 3 advanced modeler kit. That rating means it calls for moderate skills in model rocket construction and finishing, so it suits a builder who has already completed simpler kits and is comfortable with multi-session assembly. The kit is recommended for ages 12 to adult, and direct adult supervision is suggested for those under 16 when flying model rockets of this size and power.

How big and heavy is the finished rocket?

The completed model measures 44 in. (112 cm) long with a 2.6 in. (67 mm) diameter and weighs 18 oz. (510 g). It uses a 29mm motor mount with a 24mm adaptor. Those dimensions put it firmly in mid-power territory, which is why the launch equipment requirements below matter.

What comes in the kit?

The kit includes molded polymer fins with precision airfoils, the Fin-Lok fin mounting system, heavy-duty 1/4 inch launch lugs and conformal rail guides, a pre-assembled nylon rip-stop parachute, a large self-adhesive decal sheet and motor adapters for different length, diameter and power Enerjet or AeroTech motors. It also has a screw-on aluminum 29mm motor retainer that doubles as a 24mm adapter and retainer. The styling is based on the Navy's Standard ARM missile.

What do I still need to buy separately?

Hobby glues, finishing supplies, building tools, the launch system and rocket motors are not included. For E, F and G motors you will also need the AeroTech Mantis Launch Pad (89281), the AeroTech Interlock Launch Controller (893891), 24mm Q-Jet, Enerjet or AeroTech motors with FirstFire Initiators, and recovery wadding. The Interlock Launch Controller requires a 12-volt battery source, which is also not included.

Kit specifications that shape your build and launch plan

Motor choice and launch equipment

Which motors does the Strong-Arm use?

The catalog lists Enerjet E20-4W for the first flight, plus E30-4T, F44-4W, F67-6W, G74-6W, G74-9W and G80-10T. Other AeroTech S-U, RMS, LMS and DMS motors with a similar motor type (power) designation should also be OK. For additional motor recommendations, the manufacturer points to RockSim or OpenRocket software.

Can I fly it on a 24mm motor?

Yes. The kit includes a screw-on aluminum 29mm motor retainer that doubles as a 24mm motor adapter and retainer, and the kit comes with motor adapters that allow a range of different length, diameter and power Enerjet or AeroTech motors. The 24mm Q-Jet motors are specifically mentioned among the motors that work with the required launch equipment.

What launch pad and controller do I need?

For E, F and G motors, the catalog specifies the AeroTech Mantis Launch Pad (89281) and the AeroTech Interlock Launch Controller (893891). The controller needs a 12-volt battery source, which is not included. You will also need FirstFire Initiators and recovery wadding.

Does the Strong-Arm need parachute wadding?

No. The Labyrinth ejection gas cooling system cools the hot gas from the motor's ejection charge, and the cooled gas pressurizes the parachute bay and ejects the parachute without requiring parachute wadding. That said, the launch equipment list still mentions recovery wadding as a required item for E, F and G flights, so check your motor and field rules.

Build time, assembly and finishing

How long does the build take?

The catalog states that assembly, finishing and glue drying time will take multiple sessions and up to a couple of days to complete the kit properly. Plan for a project rather than a single afternoon.

Is assembly difficult?

The Fin-Lok fin mounting system carries and distributes aerodynamic and thrust loads through an integrated rocket structure, and the catalog describes assembly as quick, easy, neat and precise. The molded polymer fins and strakes are pre-formed, so you are not shaping fins from balsa. The Skill Level 3 rating still assumes moderate construction and finishing experience.

What finishing supplies do I need?

Hobby glues, finishing supplies and building tools are not included. The kit supplies a large self-adhesive decal sheet for the Standard ARM-style markings, but paint and other finishing materials are up to you. The catalog does not specify a particular paint type or finish schedule.

What the catalog does not answer

The supplied information does not give a maximum liftoff weight, recommended center-of-gravity position or specific delay drilling instructions for the Strong-Arm. It also does not list individual part numbers for the fins, centering rings or parachute, or confirm certifications beyond the Skill Level 3 rating. For those details, consult the kit instructions and the motor manufacturer's data.

The catalog also does not state a recommended field size or wind limit for E, F and G flights. Those are decisions you will need to make based on your launch site and local rules.