Quick answer
Assemble the Akhelian Thrallmaster by dry-fitting every part before gluing, using plastic glue for the main joints, and filling mold lines before priming to ensure a clean paint job.
Why assembly order matters
The Akhelian Thrallmaster is a Leader unit for the Idoneth Deepkin in Warhammer Age of Sigmar. It requires assembly and painting, so the order you build parts affects how easy it is to reach every surface with a brush.
If you glue the arms and head on too early, you may block access to the chest and back details. Build in sub-assemblies to keep those areas paintable.
Tools you already need
You probably have most of what you need: a hobby knife, plastic glue or super glue, clippers, and a file or sanding stick. If you plan to paint in sub-assemblies, add some poster putty or masking tape to hold parts temporarily.
Assembly steps
- Clean the parts: Remove each part from the sprue with clippers, then trim away mold lines and sprue attachment points with a hobby knife. Sand any rough spots. Check that all mold lines are gone before you glue—this is the most common place to miss.
- Dry-fit the body: Press the torso, legs, and head together without glue to see how they align. Adjust any warped parts by dipping them in warm water and bending gently. If a joint doesn't sit flush, file it down before gluing; don't force it.
- Glue the lower body: Apply plastic glue to the leg and hip joints and press them together. Hold for a few seconds until the bond sets. Use super glue if the parts are resin or metal. Plastic glue works by melting the plastic, so use it sparingly to avoid excess that can smear details.
- Attach the torso and head: Glue the torso to the legs, then attach the head. Make sure the head is angled to look in a natural direction for a leader pose. Leave the arms off for now if you plan to paint the chest area—this is a key sub-assembly decision.
- Add the arms and weapon: Dry-fit the arms and weapon to see how they hold. Glue them in place, checking that the weapon doesn't obscure the face. If it does, consider painting the head separately. If the weapon blocks access to the head, that's a sign to paint in sub-assemblies.
- Fill gaps and prime: Use a small amount of gap-filling putty or liquid green stuff to fill any seams. Once dry, sand smooth and wash the model with soapy water. Prime with a rattle can or airbrush. A clean prime coat reveals any remaining mold lines, so inspect again after priming.
Product facts
-
Idoneth Deepkin: Akhelian Thrallmaster: This finely detailed miniature is designed for Warhammer Age of Sigmar as part of the Idoneth Deepkin faction and is classified as a Leader unit on the tabletop. Because it's a leader, you'll want the model to stand out, so take extra care with assembly and seam lines to make the details pop.
Idoneth Deepkin: Akhelian Thrallmaster