Motor mount and power questions
What motor mount does the AMRAAM AIM-120C 2.63" use, and what motors can I fly?
The kit comes with a 38mm motor mount. According to the catalog, that mount is great for Level 1 motors if your field can handle it. The kit also flies well on a variety of F and G motors when you use the optional MMA-2 motor mount adapter. So you have a choice: stick with 38mm motors for higher power, or adapt down for smaller fields.
Do I need the MMA-2 adapter to fly this kit?
No. The adapter is optional and only needed if you want to run smaller F or G motors. If you plan to fly on 38mm motors only, you can skip it. The catalog lists the MMA-2 as an optional accessory, not a required part.
Is this kit suitable for Level 1 certification?
The catalog says the 38mm motor mount is great for Level 1 motors if your field can handle it. That means the kit is capable, but your field size and local rules ultimately determine whether you can fly it for a certification attempt. Check with your club or launch site before you commit.
Fin installation and airframe questions
How are the fins installed on the AMRAAM AIM-120C 2.63"?
The kit features through-the-wall fin construction and a factory pre-slotted airframe. That means the fins extend through the body tube and bond to the motor mount tube inside, which generally gives a stronger joint than surface-mounted fins. The pre-slotted airframe saves you from cutting your own slots.
What should I check before gluing the fins?
Do a dry fit first. Slide the fins into the pre-cut slots and check that they seat fully and align with the motor tube. Because the slots are factory-cut, they should match the fin thickness, but it is still worth confirming that each fin sits flush and straight before you apply adhesive. The catalog does not provide specific clearance measurements, so rely on the physical fit of the parts you receive.
Does the kit include laser-cut fins and rings?
Yes. The catalog states that all Loc Precision kits include laser-cut fins, rings, and slotted airframes. That applies to this AMRAAM kit as part of the ISP Performance Series.
Kit components that affect your build
-
AMRAAM AIM-120C 2.63": The AMRAAM AIM-120C 2.63" is part of the ISP Performance Series, which features factory pre-slotted airframe and through-the-wall fin construction. These features simplify fin alignment and strengthen the fin-to-motor-tube joint, which is a key concern for high-power flights.
AMRAAM AIM-120C 2.63"
-
AMRAAM AIM-120C 2.63": The kit includes a 30" booster section, 15" payload, 28" ripstop nylon parachute, 38mm motor tube, fire-resistant blanket, Kevlar shock cord mount with nylon webbing shock cord, rail buttons, and vinyl decals. Knowing what is in the box helps you plan the build sequence and identify any additional supplies you might need, such as adhesives or motor hardware.
Recovery and field setup questions
What recovery system does the kit use?
The AMRAAM AIM-120C 2.63" uses parachute recovery. The catalog lists a 28" ripstop nylon parachute, a fire-resistant blanket, and a Kevlar shock cord mount with nylon webbing shock cord. Those components are included, so you do not need to source them separately unless you want to customize.
How do I install the shock cord and parachute?
The catalog does not provide step-by-step recovery installation instructions. However, the presence of a Kevlar shock cord mount and fire-resistant blanket suggests a typical high-power setup: the shock cord anchors to the mount, and the blanket protects the parachute from ejection charge heat. Follow the kit's included instructions for exact placement and assembly.
Are rail buttons included?
Yes, the kit includes rail buttons. That means you can use a rail launcher rather than a rod, which is common for high-power rockets. The catalog does not specify the rail size, so check the included hardware or the instructions for compatibility with your launch system.
Build planning and documentation questions
Does the kit come with instructions and RockSim file?
The catalog references AMRAAM Instructions and an AMRAAM RockSim file as additional product details. That means you should have access to build documentation and a simulation file to help plan flights. The catalog does not state whether these are printed or digital, so check the product listing or packaging for specifics.
What adhesives or tools will I need?
The catalog does not list required adhesives or tools. For a high-power kit with through-the-wall fins and a 38mm motor mount, you will typically need epoxy and basic building tools, but confirm against the kit instructions. Do not assume any adhesive is included.
Can I fly this kit on smaller fields?
With the optional MMA-2 adapter, you can fly on F and G motors, which may suit smaller fields better than full 38mm motors. The catalog does not give expected altitudes, so use the RockSim file or your own simulations to estimate performance for your chosen motor and field size.
