Quick Answer
The Asetek Initium Pedals Set is a versatile sim racing pedal set that works in both floor and cockpit modes. Follow our step-by-step guide to set up and calibrate your pedals for a precise and comfortable racing experience.
Why the Initium Pedals Work in Two Modes
The Initium Pedals Set is designed to deliver a sublime driving experience whether you mount them on the floor or in a cockpit. This flexibility means you can start with a simple floor setup and later move to a cockpit without needing a different pedal set.
The pedals use precise hall sensor mechanisms instead of traditional potentiometers, which helps maintain consistent readings and reduces wear over time. This makes them a reliable choice for sim racers who want dependable performance.
What to Check Before You Start
Before mounting the pedals, make sure you have the necessary tools (e.g., hex keys) and that your rig or floor area is clean and stable. Also, verify that the pedal set is compatible with your wheelbase and platform—check the manufacturer's specifications if you're unsure.
If you plan to use the pedals in cockpit mode, ensure your rig's pedal mount has the correct hole pattern and clearance for the pedal base. For floor mode, you'll need a non-slip surface to keep the pedals firmly in place during hard braking.
Step-by-Step Setup and Calibration
- Unbox and inspect: Carefully unpack the pedal set and check all components against the manual. Ensure nothing is damaged and that you have the mounting hardware for your chosen mode (floor or cockpit). If any parts are missing or damaged, contact support before proceeding.
- Choose your mounting mode: Decide between floor mode (place pedals on a flat, non-slip surface) or cockpit mode (bolt the pedal base to your rig's pedal mount). For cockpit mode, align the holes and use the provided bolts; for floor mode, ensure the base is stable and won't slide under braking. Check that the pedal base is level and securely fixed to avoid movement during use.
- Connect the pedals: Plug the pedal set into your wheelbase or PC using the supplied USB or proprietary cable. Follow the manufacturer's connection diagram to ensure correct wiring. Make sure the connection is snug and not under tension to prevent disconnects.
- Install drivers and software: Download and install the latest drivers and software for the Initium Pedals from the official Asetek website. This allows you to access calibration settings and firmware updates. Keep the software updated to benefit from performance improvements.
- Calibrate the pedals: In the software, calibrate each pedal's range by pressing the throttle, brake, and clutch to their limits. Follow the on-screen prompts to set the minimum and maximum values. If the pedals feel off, recalibrate after any changes to mounting or adjustments.
- Adjust pedal feel and position: Adjust the pedal faces and spring preload (if applicable) to match your preferred angle and resistance. In floor mode, you may need to angle the pedals to avoid leg strain; in cockpit mode, adjust the pedal plate height and distance. Spend time fine-tuning to avoid discomfort during long sessions.
- Test in-game: Launch your favorite sim title and test the pedals in a practice session. Verify that braking is progressive and that the throttle responds smoothly. Make minor adjustments to the software settings if needed. If braking feels too sensitive or too soft, revisit the calibration and adjust the brake force curve.
Product Facts
-
Asetek Initium Pedals Set: The Initium Pedal Set delivers a sublime driving experience that lets you race in floor or cockpit mode – no sacrifices. This dual-mode design means you can switch between a floor setup and a cockpit mount without needing a different pedal set.
Asetek Initium Pedals Set
-
Asetek Initium Pedals Set: Made with track-grade materials, and featuring precise hall sensor mechanisms, upgrade the way you race. Hall sensors provide accurate and consistent pedal readings, while track-grade materials ensure durability during intense racing sessions.