Quick answer

To replace the Audison Prima SSP Sub Smart Plug, disconnect the existing plug from the terminal block, then connect the new SSP using the Plug & Play connector. Ensure the power is off before starting.

Why replace the SSP smart plug?

The Audison Prima SSP (Sub Smart Plug) is a dedicated connector for the APBX 10 AS and APBX 8 AS powered subwoofers. Over time, the plug may wear out due to frequent disconnection or cable stress, causing intermittent audio or no power. Replacing it restores reliable connection without needing to replace the entire subwoofer.

What you need before starting

You will need the replacement Audison Prima SSP smart plug (compatible with both APBX 10 AS and APBX 8 AS), a small flathead screwdriver for the terminal block, and a clean workspace. No soldering is required because the SSP uses a Plug & Play connector.

Step-by-step replacement guide

  1. Disconnect power: Turn off the vehicle ignition and disconnect the negative battery terminal to avoid short circuits or accidental activation. A common mistake is skipping battery disconnect — always do this first.
  2. Locate the SSP terminal block: On the back of your APBX 10 AS or APBX 8 AS subwoofer, find the terminal block where the SSP is connected. It is marked and uses a single Plug & Play connector.
  3. Remove the old SSP: Press the release tab on the Plug & Play connector and gently pull the old SSP straight out. Do not twist or yank the wires. If the connector feels stuck, use a small flathead screwdriver to gently pry the tab — never pull on the cable.
  4. Insert the new SSP: Align the new Audison Prima SSP’s Plug & Play connector with the terminal block and push firmly until it clicks into place. Ensure the release tab snaps back. An incomplete click means the connection is loose — double-check it is fully seated.
  5. Reconnect power and test: Reconnect the negative battery terminal, start the vehicle, and play audio to verify the subwoofer operates normally. Listen for intermittent dropouts. If the subwoofer does not power on, recheck the SSP connection and ensure the terminal block is clean.

Product details

  • Audison Prima SSP Replacement Sub Smart Plug for APBX 10 AS & APBX 8 AS: SSP (Sub Smart Plug) with Plug & Play connector. The terminal block has a single connector for easy disconnect. This design allows you to swap the plug quickly without cutting or soldering wires, reducing installation time and risk of error.

    Audison Prima SSP Replacement Sub Smart Plug for APBX 10 AS & APBX 8 AS

    Audison Prima SSP Replacement Sub Smart Plug for APBX 10 AS & APBX 8 AS