What Comes in the Box
The Vanquish Products Battle Born Wheels 1.9 Delta beadlock wheel set includes two front face pieces (Delta design), two rear rings, two anodized slotted beadlock rings, two 0.8" molded clamp rings, a screw kit (VPS05000), and an instruction sheet. The wheels are available in Black and Bronze color options.
The slotted beadlock ring design is a licensed Battle Born Wheels feature. Note that the included rings are not IFR (internal foaming ring) compatible, so plan your tire and foam setup accordingly.
Assembly Steps for the Delta Beadlock Wheels
Assemble each wheel by following the order below. The supplied instruction sheet provides detailed torque and sequence guidance; these steps summarize the key points.
- 1. Prepare the hub and clamp ring: Start with the raw aluminum, black aluminum, or brass hub (sold separately). Place the 0.8" molded clamp ring onto the hub. The clamp ring holds the tire bead against the wheel.
- 2. Mount the tire and rear ring: Fit your tire over the hub and clamp ring. Then place the rear ring on the opposite side of the tire. The rear ring completes the beadlock sandwich.
- 3. Install the Delta front face and slotted ring: Position the Battle Born Wheels Delta front face on the outside of the wheel. Then place the anodized slotted beadlock ring on top of the front face. The slotted design adds a distinctive look.
- 4. Secure with the screw kit: Use the included screw kit (VPS05000) to fasten the assembly. Tighten the screws evenly in a crisscross pattern to ensure even clamping pressure. Do not overtighten.
Compatibility and Fitment Notes
These wheels require SLW hubs (sold separately). The hubs are available in raw aluminum, black aluminum, and brass options. The brass hubs add weight to the wheel for better crawling performance.
The included rings are not IFR compatible, so standard foam inserts must be used. The anodized slotted beadlock rings may show slight color variation between batches due to the anodizing process, which is normal for aluminum parts.
Optional parts such as brass clamp rings (0.8") and scale hardware are available separately if you want to customize the look or weight distribution.
Key Specifications at a Glance
-
Battle Born Wheels 1.9 Delta: Officially licensed Battle Born Wheels design with slotted beadlock rings Confirms the wheels are genuine Battle Born product, not a generic imitation.
Battle Born Wheels 1.9 Delta
-
Battle Born Wheels 1.9 Delta: Uses 0.8" wide clamp rings (included) The clamp ring width determines tire bead compatibility; 0.8" is standard for most 1.9 tires.
-
Battle Born Wheels 1.9 Delta: Requires SLW hubs (sold separately) You need to purchase hubs separately; the wheel kit does not include them.
-
Battle Born Wheels 1.9 Delta: Included rings are not IFR compatible Plan to use standard foam inserts; internal foaming rings will not fit.
