Before You Begin: Understanding the Modular Design

The Bennington Connect Up/Down Pendant builds on the clean elegance of the standard Bennington Horizontal Up/Down design with a modular twist. Multiple lengths of the fixture can be seamlessly connected through their metal end caps, allowing runs of light to be tailored precisely to the space. This means installation is not a one-size-fits-all process — you need to plan the layout and connection sequence before mounting.

This guide covers the supported steps and checkpoints based on the supplied product information. Always refer to the manufacturer's full installation instructions that come with your fixture for complete wiring and mounting details.

Bennington Connect Up/Down Pendant Key Facts

  • Bennington Connect Up/ Down Pendant: Multiple lengths of the fixture can be seamlessly connected through their metal end caps, allowing runs of light to be tailored precisely to the space. This modular connection system is the core feature that distinguishes installation from a standard pendant. You must account for the connection sequence and alignment during mounting.

    Bennington Connect Up/ Down Pendant

    Bennington Connect Up/ Down Pendant

  • Bennington Connect Up/ Down Pendant: Constructed from solid white oak or walnut and finished with plated or powder-coated metal end caps, the Bennington Connect Up/Down Pendant illuminates both upwards and downwards, offering both functional and ambient illumination. The wood and metal finish choices affect the overall weight and the care needed during handling. The up/down illumination also influences placement height and clearance.

Planning the Layout and Connection Sequence

Before you touch any tools, decide how many fixture lengths you need and how they will connect end-to-end. Because the metal end caps are the connection points, each additional section adds to the total run. Measure your space carefully and confirm that the combined length fits your intended area.

The Bennington Connect Up/Down Pendant is available in multiple size options (e.g., Two) with various wood and metal finish combinations. Choose your configuration before installation so you have all the correct sections on hand.

Installation Steps

  1. 1. Prepare the mounting surface and electrical box: Ensure the ceiling electrical box is rated to support the weight of the connected pendant run. The supplied product information does not specify a weight, so use the manufacturer's weight rating for your specific configuration. Turn off power at the circuit breaker before any wiring work.
  2. 2. Connect the fixture sections: Align the metal end caps of adjacent fixture lengths and connect them securely. The modular design allows seamless connection, but you must ensure each joint is tight and properly aligned before proceeding.
  3. 3. Attach the assembled run to the ceiling mount: With the sections connected, lift the assembled pendant run into position and attach it to the ceiling mounting bracket. Follow the manufacturer's instructions for securing the fixture. The Bennington Connect Up/Down Pendant is available for downward or upward LED only, so confirm the orientation matches your desired light direction.
  4. 4. Complete the wiring connections: This step requires a qualified electrician. The supplied product information does not include wiring steps, and mains-voltage connections must comply with local electrical codes. Do not attempt to modify or extend the fixture's wiring yourself.
  5. 5. Install bulbs and test: After wiring is complete and the fixture is securely mounted, install the recommended LED bulbs (not supplied) and restore power. Test the up and down light functions separately if your configuration supports both.

Important Safety and Compliance Notes

The Bennington Connect Up/Down Pendant is an electrical fixture. The supplied product information does not include specific wiring instructions or qualified-installer requirements, but for safety, any mains-voltage installation should be performed by a licensed electrician. Do not exceed the circuit capacity — the modular connection does not upgrade the electrical rating.

Always verify that your ceiling structure can support the combined weight of the connected pendant sections. If you are unsure, consult a professional installer before proceeding.

What to Confirm Before You Order

Before purchasing, confirm the total run length you need and select the appropriate size and finish options. The Bennington Connect Up/Down Pendant is available in multiple wood (White Oak, Walnut) and metal finish (Brass, Copper, Stainless, Black Powder Coat, White Powder Coat) combinations. Ensure your electrical box and circuit can handle the fixture's requirements — the supplied information does not list specific electrical ratings, so check the product documentation or contact the manufacturer for details.

If you plan to install the pendant yourself, verify that you have the necessary tools and skills. For complex runs or high ceilings, professional installation is strongly recommended.