Measure the room before you measure the bed
A full platform bed like the Bermacy Bed is a straightforward purchase until you try to walk it into a bedroom. The catalog lists the assembled dimensions and the assembly requirement, so your job is to compare those numbers with the real space you have. Start by measuring the room, not the product page.
You need three measurements: the wall where the bed will sit, the open floor you want to keep, and the path from the delivery entrance to the bedroom. Write them down in the same units the catalog uses so you can compare without converting on the fly.
What the Bermacy Bed record confirms
-
Bermacy Bed: Full platform bed (does not include headboard) The bed is full size and arrives without a headboard, so your wall plan should account for the platform alone rather than a headboard footprint.
Bermacy Bed
-
Bermacy Bed: Bed does not require a foundation/box spring You can skip box-spring clearance in your planning and place the mattress directly on the platform.
-
Bermacy Bed: Assembly required Plan floor space for unpacking and assembly, not just the final bed position.
-
Bermacy Bed: 57''W x 78''D x 16''H These are the catalog dimensions for the assembled bed; use them as the footprint you compare against your room measurements.
-
Bermacy Bed: Weight: 73 lbs. The listed weight helps you judge whether you can move the carton yourself or need a second person for delivery day.
A room-measurement routine for a full platform bed
Run these checks in order. Each one can eliminate a layout problem before the bed arrives.
- Measure the wall and the walking path: Mark the width of the bed against the wall where you plan to place it. Then measure the open floor between the bed and the nearest door, dresser, or closet. The catalog gives the bed footprint; only you can measure the room.
- Check the delivery route: Measure door openings, hallway widths, stair turns, and elevator dimensions along the path to the bedroom. The Bermacy ships as an assembly-required platform bed, so the carton and individual pieces must fit through that route.
- Reserve assembly floor space: Because assembly is required, clear an area larger than the bed footprint where you can unpack and work. A full-size platform has a long, wide frame, so open floor matters more than a narrow strip beside the wall.
- Confirm the mattress plan: The Bermacy Bed does not include a mattress and does not require a foundation or box spring. Measure your mattress and confirm it is a full-size mattress before delivery day.
- Decide the final position and leave it clear: Once the bed is assembled, moving it is harder than sliding a small table. Mark the final corners with tape and keep that area empty before the delivery window.
Bed clearance planning: what the catalog does and does not settle
The Bermacy record gives the assembled width, depth, and height, plus the weight and the assembly requirement. It does not list a recommended clearance from walls, a minimum doorway width, or a load limit. Those are room-specific decisions, not catalog specifications.
Treat the listed dimensions as the bed footprint and nothing more. If your room is tight, measure the actual gap between the bed and each fixed object rather than relying on a general rule of thumb. The same applies to the delivery path: the catalog does not confirm carton dimensions, so measure your tightest door and hallway before ordering.
Delivery prep that matches the Bermacy Bed
The Bermacy Bed is made with engineered wood and decorative laminate, and the record lists a warm light brown finish over replicated hickory grain. Those details affect how you handle the carton, not how you measure the room. Keep the carton flat and dry before assembly, and unpack it in the clear area you reserved.
The listed weight is 73 lbs. If you are assembling alone, plan for the frame pieces to be moved separately rather than lifting the whole carton at once. The catalog does not supply step-by-step assembly instructions, so use the instructions that arrive with the bed and stop if a step does not match the parts you have.
Fit check: room scenarios for a full platform bed
Use these comparisons to decide whether the Bermacy Bed layout works in your room before you order.
- Small bedroom with one clear wall: Measure the wall width against the bed width and keep the walking path to the door clear. The platform has no headboard, so the wall behind it can stay simple.
- Bedroom with a closet or dresser opposite the bed: Measure the gap between the bed footprint and the furniture you need to open. The catalog does not list a recommended clearance, so use your own access needs.
- Tight hallway or stair turn: Measure the narrowest point on the delivery route. If the carton or frame pieces will not pass, the room size alone does not solve the problem.
- Mattress already owned: Confirm it is full size and remember the Bermacy does not need a foundation or box spring. A mattress is sold separately.



