Getting Started with Your Big Wing 270° Awning

The Big Wing 270° Awning is designed to deploy quickly from a sleek, durable ABS hard case, providing 115 sq. ft. of coverage. Before you head out, confirm that your vehicle's crossbars or rack system have a center channel — the standard mounting kit requires this. The awning is available in passenger-side and driver-side fitments, so choose the side that matches your setup.

This guide covers the basic steps for setup and fine-tuning the awning's position, tension, and angle so you get reliable shade without fuss.

Step-by-Step Setup

  1. Mount the awning to your crossbars: Attach the mounting brackets to the center channel of your crossbars using the supplied hardware. Tighten the bolts enough to hold the awning in place but leave some play for adjustment. The ABS hard case should sit level and parallel to the vehicle.
  2. Adjust the side and angle: With the awning loosely mounted, check the clearance from your vehicle's roof and side. The box-section aluminum arms pivot on heavy-duty aluminum hinges, so you can tilt the awning slightly to shed water or align it with the vehicle's roofline. Tighten the mounting bolts once the position looks right.
  3. Deploy the awning: Unlatch the hard case and pull out the awning fabric. The arms will extend automatically. Walk the awning out to full extension, keeping the fabric taut. There are no zippers to stick or snag — the fabric deploys freely.
  4. Tension the fabric: Once the arms are fully extended, adjust the tension by pulling the fabric at the outer corners. The 200g Polyester RipStop fabric is waterproof and blackout-coated, so a smooth, wrinkle-free surface helps it shed rain and block sun effectively. Secure the arms with the provided stakes or tie-downs if wind is expected.
  5. Test the LED lighting: The integrated battery-powered LED lighting can illuminate the space after dark. Check that the lights are working before your trip, and keep spare batteries on hand.

Fine-Tuning the Fit

After the initial setup, you may want to adjust the awning's position to better suit your campsite layout. The heavy-duty aluminum hinges allow you to pivot the arms smoothly, so you can angle the awning to block low sun or direct rain runoff away from your cooking area. If the fabric sags, re-tension it by pulling the outer edge a bit tighter — the ripstop material holds its shape well once tensioned.

For vehicles with a curved roofline, you can shim the mounting brackets slightly to level the awning. Avoid over-tightening the bolts, which can distort the hard case or make future adjustments difficult.

Big Wing 270° Awning at a Glance

  • Big Wing 270° Awning: Deploys from a durable ABS hard case with box-section aluminum arms on heavy-duty aluminum hinges. The hard case protects the awning during travel, and the aluminum arms provide smooth, reliable extension without sticking.

    Big Wing 270° Awning

    Big Wing 270° Awning

  • Big Wing 270° Awning: Provides 115 sq. ft. of coverage with 200g Polyester RipStop fabric that is waterproof, blackout-coated, and graphene-treated. The large coverage area and durable fabric mean you get reliable shade and weather protection on most trips.

  • Big Wing 270° Awning: Integrated battery-powered LED lighting illuminates the space after sunset. No need for extra lanterns or wiring — the built-in lights make the awning usable into the evening.

  • Big Wing 270° Awning: Available in passenger-side and driver-side fitments. Choose the side that matches your vehicle setup for optimal coverage and clearance.

What the Supplied Information Does Not Confirm

The product evidence does not include specific instructions for staking or guying the awning in high winds, nor does it specify a maximum wind speed for safe use. The fabric is described as waterproof and blackout-coated, but no UV protection rating or fire resistance claim is provided. For safety, always assess conditions at your campsite and use common sense when deploying any awning in windy weather.