Start with the waistband and leg line
A bikini bottom fits when the waistband sits where you expect and the leg opening follows your leg without digging or floating away. Before you buy, read the rise and cut description as carefully as the size chart. A low-rise, high-cut style sits below the navel and opens higher on the hip, which changes how the same size feels compared with a medium-coverage brief.
The Bottom metallic brief is described as low-rise and high-cut with medium briefs coverage, available in XS–L. That combination gives you a clear starting point: if you prefer more coverage across the front and back, this cut is not the one to force into a different size. Instead, use the size range and the model measurements as a reference for proportion.
What the Bottom record confirms about fit
-
Bottom: Low-rise, high-cut style with medium briefs coverage, available in XS–L. This tells you where the waistband sits and how much coverage to expect, so you can compare it with bottoms you already own.
Bottom
-
Bottom: Model wears size XS top and bottom; height 176 cm, bust 85, waist 65, hips 93. Use these measurements as a proportion reference, not a guarantee that XS will fit you the same way.
-
Bottom: Double-lined 84% Nylon, 16% Spandex. The fabric blend and double lining affect stretch and opacity, which matter when you judge how the bottom will sit and stay in place.
How should bikini bottoms fit?
A well-fitting bikini bottom should feel secure without leaving deep marks. The waistband should lie flat against your body, and the leg openings should follow the crease of your leg rather than cutting across it. If the fabric pulls away from your back or the front rides down when you move, the size or cut is likely wrong for your shape.
For a low-rise, high-cut bottom like the Bottom metallic brief, check two things in a mirror: whether the waistband stays level all the way around, and whether the high-cut leg opening sits where you want it on your hip. If the waistband rolls or the leg edge digs in, try a different size rather than relying on the ties alone.
A simple side tie adjustment routine
Side ties let you fine-tune tension, but they cannot fix a bottom that is the wrong size. Use this sequence when you first try on a tie-side bikini bottom.
- 1. Untie both sides before you put the bottom on.: This lets you position the fabric on your hips first, then adjust each tie evenly.
- 2. Set the front and back where you want them.: Center the bottom so the coverage matches the cut description. For a medium-coverage brief, the front and back should feel balanced rather than pulled to one side.
- 3. Tie each side with matching tension.: Start with a loose knot, then tighten both sides equally. Uneven tension is the most common reason a tie-side bottom twists or shifts.
- 4. Move around before you finalize the knot.: Sit, stand, and take a few steps. If the waistband rolls or the leg edge digs in, loosen both ties slightly and readjust.
- 5. Check that the ties sit flat.: A bulky or twisted knot can create pressure points. Retie if the knot feels lumpy under clothing or against your skin.
Bikini bottom sizing tips before you order
Use these checks to choose a size when you cannot try the bottom on first.
- Compare the cut, not just the size label.: A medium-coverage, high-cut brief in XS–L will feel different from a full-coverage bottom in the same size. Read the rise and coverage description before you decide.
- Use the model measurements as a proportion guide.: The Bottom record lists a model wearing XS with height 176 cm, bust 85, waist 65, and hips 93. If your hips are significantly different, use that as a signal to size up or down rather than assuming XS is universal.
- Check the fabric stretch.: The Bottom is 84% Nylon and 16% Spandex with double lining. Spandex gives stretch, but the double lining adds structure. If you are between sizes, consider how much stretch you want for swimming versus sunbathing.
- Note the final sale policy.: The Bottom is final sale and cannot be returned or exchanged. That makes pre-purchase sizing checks more important than with a returnable item.
Keeping bikini bottoms in place
Bikini bottoms that stay in place usually share three traits: the right size, even tie tension, and a cut that matches your body. If a bottom shifts when you swim or walk, first check whether the ties are evenly tensioned and whether the waistband is sitting at the intended rise. For a low-rise style, pulling it up higher than designed can cause the back to ride down.
The Bottom record notes that lighter colors may appear translucent when wet. If opacity matters to you, choose a darker color from the available options such as Black, Cassis, or Rum, and check the double lining as part of your fit decision. The metallic finish is a style choice, but the fit still depends on the cut and size.
Bottom color and size options
- Bottom: Available in XS–L across colors including Black, Cassis, Rum, Aquamarine, Gold, and Soleil. Color availability varies by size, so check the specific combination before you order, especially since the item is final sale.
- Bottom: Lighter colors may appear translucent when wet. If you plan to swim, this is a practical reason to consider a darker color or to check the double lining against your comfort level.



