Why a Window Mount for Your Blink Mini 2?
If you want to keep your Blink Mini 2 or Blink Mini 2K+ camera safe from rain, snow, or dust while still monitoring the outdoors, a window mount is a practical solution. The mount attaches to the inside of your window using strong adhesive, letting the camera look outside through the glass. This setup protects the camera from weather and reduces the need for outdoor wiring or housing.
The mount described here is designed exclusively for the Blink Mini 2K+ and Blink Mini. It is not compatible with any other Blink cameras, so double-check your camera model before ordering.
What You Get with This Mount
-
Window Mount for Blink Mini 2k+ & Blink Mini 2 Cameras - Easy To Install Holder & Secure Attachment with 3M VHB: Exclusively designed for the Blink Mini 2K+ & Blink Mini. Offers a perfect fit, stable support, and optimal viewing angles. You don't need to worry about the camera slipping or the mount blocking the lens. The fit is tailored to these specific models.
Window Mount for Blink Mini 2k+ & Blink Mini 2 Cameras - Easy To Install Holder & Secure Attachment with 3M VHB
-
Window Mount for Blink Mini 2k+ & Blink Mini 2 Cameras - Easy To Install Holder & Secure Attachment with 3M VHB: Attaches firmly to your window using high-strength adhesive tape (3M VHB). No tools required. Installation is quick and clean—no drilling, screws, or brackets. The adhesive provides a reliable hold on clean glass.
-
Window Mount for Blink Mini 2k+ & Blink Mini 2 Cameras - Easy To Install Holder & Secure Attachment with 3M VHB: Indoor installation, outdoor view. Perfect for monitoring front yard, backyard, or driveway without needing an outdoor setup. You can keep the camera inside (safe from theft and weather) while still seeing what's happening outside. Ideal for renters or anyone avoiding exterior modifications.
How to Install the Window Mount
The supplied information does not include step-by-step instructions, but the product description and care notes give enough to understand the process. Here is a reasonable sequence based on that evidence.
- Clean the window surface: Wipe the inside of the window where you plan to attach the mount. Remove dust, grease, or moisture so the adhesive sticks firmly.
- Peel the adhesive backing: The mount uses high-strength adhesive tape (3M VHB). Peel off the protective backing to expose the sticky side.
- Press the mount onto the window: Position the mount on the clean glass and press firmly for several seconds. The adhesive needs good contact to bond properly.
- Slide the camera into the mount: Insert your Blink Mini 2 or Mini 2K+ into the holder. The fit is designed to be snug and stable.
- Secure with the locking clip: Use the integrated locking clip to hold the camera in place. This prevents the camera from falling if bumped.
- Adjust the viewing angle: Position the camera to point through the glass at the area you want to monitor. The mount supports optimal viewing angles for outdoor surveillance.
What the Supplied Information Does Not Cover
The product record does not specify whether the mount swivels, tilts, or pans. If you need fine angle adjustments after installation, you may need to reposition the entire mount. Also, no details are given about the maximum glass thickness or whether the adhesive works on textured or tinted windows. For best results, apply the mount to a clean, smooth, flat interior window surface.
The mount is designed for indoor use only. While the camera views outdoors, the mount itself stays inside and should not be exposed to direct rain or extreme humidity.