What the BOBBIN 2G Mixed Switch Offers
The BOBBIN 2G Mixed Light Switch combines one toggle and one dimmer on a single brass plate, letting you control two separate light circuits from the same location. The toggle works well for lights you want to switch on and off simply, while the dimmer lets you adjust brightness for mood lighting. Both controls are turned from solid brass and mounted on a slim, low-profile plate that matches Plank Hardware's brass cabinet hardware.
This 2-gang switch is part of the modular BOBBIN family, so you can mix toggles and dimmers across 1-, 2-, 3-, and 4-gang plates, all finish-matched. The dimmer uses auto-detect leading or trailing edge dimming, which helps provide smooth, flicker-free control with modern LED bulbs.
Product Details at a Glance
-
BOBBIN 2G Mixed Light Switch 1 Toggle / 1 Dimmer - Brass: A 2-gang brass mixed light switch combining 1 toggle and 1 dimmer on one plate, finish-matched to brass cabinet hardware. You get consistent styling across your room's switch plates and cabinet pulls.
BOBBIN 2G Mixed Light Switch 1 Toggle / 1 Dimmer - Brass
-
BOBBIN 2G Mixed Light Switch 1 Toggle / 1 Dimmer - Brass: Toggle and dial are turned from solid brass, on a slim, flat, low-profile plate. Solid brass construction provides a premium feel and durability, while the low profile keeps the switch unobtrusive.
-
BOBBIN 2G Mixed Light Switch 1 Toggle / 1 Dimmer - Brass: The dimmer uses auto-detect leading or trailing edge dimming for smooth, flicker-free control with modern LEDs. No need to guess which dimming type your LED bulbs require; the switch adapts automatically.
Installation Steps
Before starting, ensure the power is off at the circuit breaker and that you have a compatible back box (minimum depth not specified in supplied information, so check local codes and your specific wiring setup).
The following steps are based on general best practices for modular switch installation; always follow local electrical regulations and consult a qualified electrician if unsure.
- 1. Prepare the back box and wiring: Run the appropriate cables into the back box. For a 2-gang switch, you will typically have two separate live (hot) wires for the toggle and dimmer circuits, plus a neutral for the dimmer (if required by your dimmer module—check the dimmer's instructions).
- 2. Connect the toggle module: Connect the live wire for the toggle circuit to the toggle's line terminal, and the switched live to the load terminal. Connect the neutral and earth (ground) as per local wiring standards.
- 3. Connect the dimmer module: Connect the live wire for the dimmer circuit to the dimmer's line terminal, and the switched live to the load terminal. Connect the neutral if the dimmer requires it (the supplied information does not confirm whether the BOBBIN dimmer needs a neutral; check the dimmer's documentation).
- 4. Mount the modules onto the plate: The BOBBIN modules are designed to clip or screw onto the back of the brass plate. Align each module with its corresponding opening and secure it according to the manufacturer's instructions.
- 5. Fit the plate to the back box: Carefully tuck the wires into the back box, ensuring no bare wires are exposed. Screw the plate onto the back box using the provided screws, taking care not to overtighten and damage the brass finish.
- 6. Restore power and test: Turn the power back on at the breaker. Test the toggle by flipping it on and off. Test the dimmer by rotating the dial; the light should dim smoothly without flickering.
Dimmer Compatibility and Performance
The BOBBIN dimmer's auto-detect leading or trailing edge dimming is designed to work with most modern LED bulbs, but performance can vary depending on the bulb brand and load. If you experience flickering or buzzing, try dimmable LED bulbs from a reputable manufacturer. The supplied information does not specify a minimum or maximum load rating, so consult the dimmer's documentation or contact Plank Hardware for details.
The toggle switch is a simple on/off control and should work with any standard incandescent, LED, or CFL bulb, as long as the total load does not exceed the switch's rating (not specified in supplied information).
Caring for the Brass Finish
The BOBBIN switch plate is brushed and lacquered to hold its warm gold tone. To maintain the finish, wipe the plate with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals, as they may damage the lacquer. The switch is backed by a 2-year guarantee, which covers manufacturing defects but not damage from improper cleaning or installation.
