Quick Answer

The Bobby Berk Simple Staircase in Black (Right - Float Mount) is designed for a right-side stairwell wall. Start by marking the center of your staircase wall, then use the included template to space each frame evenly along the stair angle.

Why the Right-Side Layout Matters

The Right - Float Mount version is tailored for staircases where the wall is on the right as you descend. This orientation affects how the seven frames visually climb the stairs. Mounting it on the opposite side can make the gallery feel disconnected from the stair angle.

Float mount frames sit slightly off the wall, creating a modern shadow effect. This works best when the frames are evenly spaced and aligned with the stair treads. A right-side layout naturally follows the upward line of the handrail.

Common Challenges with Float Mount Installation

Float mount frames require precise wall anchors because the frame does not sit flush against the wall. If the wall is drywall without studs, use toggle bolts rated for the weight of each frame.

The staircase angle can make leveling tricky. A laser level is more reliable than a bubble level for maintaining consistent spacing across the seven frames.

Diagnosis: Fixing Common Setup Issues

  • Symptom: Frames look uneven or tilted: Check that each frame's hanging bracket is centered. For float mounts, the bracket is usually offset; verify it matches the right-side layout. Use a laser level to mark the top edge of each frame before drilling.
  • Likely cause: Spacing not following stair angle: The frames should follow the same angle as the staircase. Measure the rise and run of your stairs, then calculate a consistent vertical and horizontal offset for each frame. Create a cardboard template of the first frame's position and shift it up and right for each subsequent frame.
  • Corrective action: Adjusting the first frame position: Start the bottom frame 6-8 inches above the lowest stair tread. This gives the gallery a natural starting point. If the wall is narrow, shift the entire layout slightly left or right to center it visually. If the wall is less than 36 inches wide, consider a smaller layout or a different orientation.
  • Stop point: Wall material or stud placement: If you cannot find a stud for the heaviest frame (usually the center one), stop and switch to heavy-duty drywall anchors rated for 50 lbs or more. Do not use adhesive strips for float mounts. When in doubt, consult a professional installer for stairwell gallery walls.

Product Facts

  • Bobby Berk - The Simple Staircase - Black (Right - Float Mount): Bobby Berk designed this exclusive seven-frame gallery wall set for Frameology, inspired by trending staircase gallery walls on Pinterest and Instagram. The set is pre-planned for a cohesive look, so you don't need to mix and match individual frames.

    Bobby Berk - The Simple Staircase - Black (Right - Float Mount)

    Bobby Berk - The Simple Staircase - Black (Right - Float Mount)