Body Geometry Cleat Stacker: Common Fit Questions
Which pedal systems does this cleat stacker fit?
The stackers are shaped to fit SPD SL, Look KEO, and Speedplay pedals. The product is available in three size options—KEO, SPD SL, and SPEEDPLAY—so choose the one that matches your pedal system.
What exactly is in the 20-pack?
The package includes 20 cleat stackers and longer screws. Each stacker is 3mm thick. The longer screws are included to accommodate the added stack height when you install the shims.
What is a cleat stacker used for?
These 3mm stackers are designed as an external cleat lift to address leg length inequality. They sit between the cleat and the shoe sole to effectively lengthen the reach of the shorter leg.
How Many Stackers Should You Use?
How do I decide how many 3mm stackers to add?
The right number depends on your specific leg length difference, which is best assessed by a qualified bike fitter or medical professional. The supplied information does not include a formula or recommended stack height for a given discrepancy. Start with the smallest change that addresses your fit issue and adjust gradually.
Can I stack multiple shims on one cleat?
The product is supplied as a 20-pack of individual 3mm stackers, and the longer screws are included to work with added stack height. The catalog does not specify a maximum number of stackers per cleat. If you plan to use more than one, check that the longer screws still engage safely and consult a professional if you are unsure.
Do I need to use all 20 stackers at once?
No. The 20-pack gives you spares and lets you fine-tune each shoe independently. You may use just one or two per cleat, depending on your needs.
Cleat Stacker Details That Affect Setup
-
Body Geometry Cleat Stacker – 20-Pack: These 3mm stackers can easily correct the common issue of leg length inequality. The 3mm thickness is the building block for your adjustment; knowing this helps you plan how many to trial.
Body Geometry Cleat Stacker – 20-Pack
-
Body Geometry Cleat Stacker – 20-Pack: Shaped to fit SPD SL, Look KEO, and Speedplay pedals. Compatibility is limited to these three systems, so confirm your pedals match before ordering.
-
Body Geometry Cleat Stacker – 20-Pack: Includes longer screws. Longer screws are needed to secure the cleat when the stack height increases; using original screws may not be safe.
-
Body Geometry Cleat Stacker – 20-Pack: Package includes 20 cleat stackers. A 20-pack provides ample spares for experimentation and replacement over time.
Setup and Adjustment Questions
How do I install the stackers?
The supplied information does not include step-by-step installation instructions. In general, cleat shims are placed between the cleat and the shoe sole, and the included longer screws are used to fasten the cleat. Because setup affects pedaling mechanics and safety, have a qualified bike fitter or mechanic install them if you are not experienced with cleat adjustment.
Will adding stackers change my cleat position?
Adding stackers increases the distance between your shoe and the pedal. The catalog does not provide guidance on how this affects fore-aft or angular cleat position. After installation, check that your cleat still engages and releases smoothly, and adjust position if needed.
Can I use these stackers on both shoes?
Yes, the 20-pack provides enough stackers for both shoes. However, leg length inequality typically requires a lift on only the shorter leg. Use them on the shoe that needs correction, and consult a fitter if you are unsure which leg needs shimming.
What should I check after installing the stackers?
The catalog does not list specific post-installation checks. As a general precaution, verify that the cleat is securely fastened, that the screws are tight, and that you can clip in and out of the pedal without resistance. If anything feels loose or unstable, stop riding and have a professional inspect the setup.
What the Catalog Does Not Confirm
The supplied product information does not include a maximum stack height, torque specifications for the longer screws, or detailed installation steps. It also does not state whether the stackers are compatible with other pedal systems beyond SPD SL, Look KEO, and Speedplay. For safety-critical setup details, consult a qualified mechanic or the manufacturer's documentation.
