Quick answer

The Britax UpNGo Click is a backless booster for children who meet its 40–120 lb and 46–63" limits, and its rigid LATCH connectors let you secure the seat so it doesn't slide when your child gets in or out. Choose it if you want a portable booster that stays put; skip it if your child still needs a high back for head and neck support.

Why LATCH matters on a backless booster

A backless booster is held in place by the child's weight and the vehicle's lap-and-shoulder belt. That works, but the seat can shift when empty, which makes buckling harder and can leave the belt path misaligned. Rigid LATCH connectors lock the booster to the lower anchors, so it stays in position between trips.

The trade-off is that LATCH is not available in every seating position, and some vehicles have lower anchor weight limits that apply to the booster plus the child. Check your vehicle manual before relying on LATCH in a specific spot.

When a backless booster is the right step

Backless boosters suit older children who have outgrown a harnessed seat and can sit upright for the whole ride. They raise the child so the vehicle's lap-and-shoulder belt fits across the hip bones and the middle of the shoulder rather than the stomach or neck.

A high-back booster still offers head and neck support for children who fall asleep in the car or whose vehicle seat has a low back. The UpNGo Click is backless only, so it is not the seat for a child who slumps or needs side support.

Common questions about the UpNGo Click

Does the Britax UpNGo Click fit my child?

The seat is rated for 40–120 lbs and 46–63" in height. Your child should also be mature enough to sit still with the vehicle belt positioned correctly for the whole trip. Weigh and measure your child before ordering; the height limit matters as much as weight.

Do I have to use the LATCH connectors?

No. The UpNGo Click can be used as a belt-positioning booster without LATCH. LATCH simply anchors the empty seat so it does not slide, and it is optional where lower anchors are not available. Confirm your vehicle's lower anchor positions and any weight limits in the owner's manual.

How do I install it with LATCH?

Place the booster on the vehicle seat, push the rigid connectors into the lower anchors until they click, then pull the seat to confirm it is secure. To remove it, release the connectors and lift the seat out. Re-check the connection each time you move the seat to a different vehicle.

Can I use it in the middle seat?

Only if that seating position has lower anchors or you are using the booster without LATCH. Many center seats have no lower anchors, so the seat would sit unanchored there. The lap-and-shoulder belt must still fit your child correctly in whichever seat you choose.

Is a backless booster safe for a child who falls asleep in the car?

A backless booster gives no head or neck support of its own, so a sleeping child can slump out of position. A high-back booster is the better choice for children who often doze off. Match the booster type to your child's travel habits, not just their size.

How do I clean the UpNGo Click?

Follow the care label on the seat fabric. Most booster seats use a removable cover that can be washed according to the manufacturer's instructions, but check the label before washing. Keep the manual with the seat so you have the cleaning and installation steps on hand.

Product facts