Quick Answer
To build the Frame Arms Girl Durga I Save the Queen Ver. kit cleanly, follow the manual order, undergate carefully, and test joints before assembly to avoid stress marks and loose parts.
Why the Save the Queen Ver. Build Differs
The Durga I Save the Queen Ver. kit stands out with its regal theme and detailed armor. Its design includes multiple undergated parts, which means nubs are hidden on the inner surface, but you still need to trim carefully to avoid visible marks.
Because this is a mecha musume kit, the joints are smaller and more delicate than typical mecha kits. Take extra care when assembling the arms and legs to prevent stress marks or breakage.
The kit uses ABS and PS plastics in different colors. Use the correct nippers and a hobby knife, and avoid twisting parts off the runners to keep the plastic clean.
Step-by-Step Assembly Guide
- Prepare your tools and workspace: Gather a pair of sharp nippers, a hobby knife, a cutting mat, and a small file or sanding stick. Organize the runners by number and clear a well-lit area. Check the manual to see which parts are undergated. Check that your nippers are sharp to avoid crushing the plastic.
- Cut parts from runners carefully: Cut each part away from the runner with a small margin, then trim closer with the knife. For undergated parts, cut at the gate and then sand flush if needed. Do not twist parts off the runner. Leave a tiny nub and trim in two passes to reduce stress marks.
- Assemble the head and face: Follow the manual to attach the face plate and hair parts. Be gentle when inserting the face into the hair piece, as the tabs are small. Check that the eyes are aligned properly. Press firmly but evenly to avoid cracking the face plate.
- Build the torso and hips: Assemble the chest and hip joints, making sure the ball joints fit snugly. Test the joint movement before attaching the torso to the legs. If a joint is too tight, sand it slightly; if too loose, apply a thin layer of hobby glue to thicken it. Test joint fit before final assembly to avoid loose or stuck parts.
- Assemble arms and legs: Build each limb in order, attaching the shoulder and hip joints. For the legs, align the knee joint correctly before closing the armor parts. Use a hobby knife to clean any visible nubs. Double-check the knee joint orientation to avoid rework.
- Attach armor and accessories: Add the shoulder armor, skirt pieces, and any included weapons or effect parts. Ensure the armor clicks into place without forcing. If a part is loose, use a small piece of tape or blue tack as a temporary fix. If armor falls off during posing, the joint may need a tiny bit of adhesive.
- Final check and posing: Once assembled, test all joints and poses. Check for any remaining nubs or stress marks and clean them up. Apply a matte topcoat if desired, but mask the clear parts first. A final inspection prevents small flaws from becoming permanent after topcoat.
Product Facts
-
FRAME ARMS GIRL DURGA I SAVE THE QUEEN VER.: All hail the Queen of Light, DURGA I Save the Queen Ver.! This special version features a regal color scheme and design that rewards careful assembly to show off its royal details.
FRAME ARMS GIRL DURGA I SAVE THE QUEEN VER.