Quick answer

To use the C Topper CT-427 Small Insert, first check that the small insert diameter (1.75 inches) matches your wand or base, apply a small amount of water-based lubricant, and slide the topper on until it sits securely. Then use gentle pressure and clean it thoroughly after each use.

Why the C Topper's soft firmness matters for use

The C Topper is made from 100% platinum cure silicone in a soft (0030) firmness. This softness makes it forgiving and comfortable, especially for users who prefer less intense pressure. However, it also means the topper may feel more flexible and require a secure fit to stay in place during use. Understanding this trade-off helps you adjust your expectations and technique.

Checking compatibility before you attach

The C Topper is designed as an insert for wands or similar bases. Its small insert diameter is 1.75 inches, and the insert depth is 2 inches. Before use, measure the diameter of your wand or base to ensure a snug fit. If the base is significantly smaller, the topper may not stay on securely; if larger, it may not insert fully. Always test the fit without lubricant first to avoid a stuck topper.

Lubricant and material considerations

Because the C Topper is platinum cure silicone, always use water-based lubricant. Silicone-based lubricants can degrade the silicone over time, making the surface tacky or causing damage. Apply only a small amount—enough to ease insertion but not so much that the topper becomes slippery and difficult to handle.

Step-by-step: using your C Topper CT-427 Small Insert

  1. Measure your wand or base: Use a ruler or caliper to measure the diameter of the part where the topper will attach. The C Topper's small insert diameter is 1.75 inches, so your base should be close to that for a snug fit. If the base is more than 0.1 inches smaller or larger, the topper may not stay secure—consider a different attachment method.
  2. Clean and dry both surfaces: Wash the C Topper and your wand with warm water and mild soap, then dry completely. Any residue or moisture can weaken the grip and promote bacterial growth. Avoid using alcohol or harsh cleaners on silicone, as they can degrade the surface.
  3. Apply a small amount of water-based lubricant: Put a drop or two of water-based lubricant on the insert rim of the topper and on the tip of your wand. Spread it evenly with your fingers. Never use silicone-based lubricant with silicone toys—it can damage the material.
  4. Slide the topper onto the wand: Align the insert opening with the wand and push gently until the topper sits flush against the base. Twist slightly if needed to seat it fully. Do not force it—if resistance is high, check for misalignment or insufficient lubricant.
  5. Test the fit with gentle pressure: Hold the wand and gently tug on the topper to ensure it stays in place. If it slips off easily, the fit may be too loose; try a thicker lubricant or a different base. A secure topper should not wobble or detach during normal use.
  6. Use with gentle pressure and check comfort: Start with light pressure and adjust as needed. The soft silicone is forgiving, but stop immediately if you feel any discomfort or pain. Pay attention to your body—softness does not eliminate the need for caution.
  7. Remove and clean after use: Pull the topper off carefully, wash with warm water and mild soap, and dry completely before storing. Avoid leaving it attached to the wand for long periods. Store in a cool, dry place away from other silicone toys to prevent deformation.

Product facts

  • C Topper -- Small Insert -- CT-427: Soft (0030) firmness, 100% platinum cure silicone. Soft silicone offers a gentle, forgiving feel, but may require careful positioning to prevent slipping during use.

    C Topper -- Small Insert -- CT-427

    C Topper -- Small Insert -- CT-427

  • C Topper -- Small Insert -- CT-427: Small insert diameter: 1.75 inches; insert depth: 2 inches. These dimensions determine compatibility with your wand or base—measure before attaching to ensure a secure fit.