Understanding Common Print Quality Problems
The Canon PIXMA E560 is a reliable all-in-one printer that handles print, scan, and copy tasks. When print quality declines, it's often due to paper handling, ink issues, or driver settings. This guide focuses on the practical steps you can take to restore sharp text and vivid colors, based on the printer's supplied specifications.
What the PIXMA E560 Is Designed to Do
-
PIXMA E560: ISO Standard print speed (A4): up to 5.7ipm (colour) / 9.9ipm (mono) These speeds indicate the printer's normal operation. If prints are slower or smudged, the issue may be with ink flow or paper type rather than hardware failure.
PIXMA E560
-
PIXMA E560: Photo Speed (4 x 6"): 44sec (borderless) Borderless photo printing at this speed suggests the printer is capable of good output. Streaks or banding on photos often point to clogged nozzles or incorrect paper settings.
-
PIXMA E560: Print, Scan, Copy The multifunction design means print quality issues can sometimes be isolated to one function. If scanning and copying are fine, the problem is likely print-specific.
Diagnosing and Fixing Streaks or Lines
Streaks or horizontal lines on prints are a common complaint. The E560's printhead and ink system are designed for consistent output, but environmental factors and usage patterns can affect them.
- Check the paper type and quality: Use paper recommended for inkjet printers. Rough or damp paper can cause ink to spread unevenly, creating streaks. The E560's specifications don't list a specific paper weight, but standard inkjet paper (80-100 gsm) is a safe starting point.
- Run a nozzle check pattern: Most Canon printers include a nozzle check utility in the driver software. If the pattern shows gaps or missing lines, the printhead nozzles may be partially clogged. The supplied information does not include a specific cleaning procedure, so refer to the printer's on-screen instructions or manual.
- Align the printhead: Misaligned printheads can cause banding. The E560's driver likely includes an alignment tool. Running it after a nozzle check can improve consistency.
Addressing Color Issues
If your prints look too dark, too light, or have an unwanted color cast, the problem is often related to ink levels, driver settings, or the color profile of your document.
- Verify ink levels: Low ink in one cartridge can cause color shifts. The supplied information does not include a low-ink warning detail, but most Canon drivers display ink levels. Replace any cartridge that is near empty.
- Check the print settings: Select the correct paper type and quality in the print dialog. Using 'Plain Paper' when printing on photo paper can cause oversaturation, while 'Photo Paper' on plain paper can make colors look washed out.
- Use the right color profile: If your document uses a specific color space (like sRGB or Adobe RGB), ensure the printer driver is set to match. The E560's supplied information does not specify supported color profiles, so stick with sRGB for general use.
When to Consider Professional Help
If you've followed the steps above and print quality hasn't improved, the issue may be mechanical or electronic. The E560's catalog does not include detailed troubleshooting for hardware failures. In such cases, contacting Canon support or a certified technician is the safest route. Avoid attempting any disassembly not described in the official documentation.
