What the CAPRI 60 LED gives you before you start
The CAPRI 60 LED is a 60-litre glass aquarium supplied with an internal Bluwave 01 two-stage filter (mechanical and adsorbent), filtering material, a pump, and an 8.5 W LED bar with transformer. The glass is 4 mm thick, and the tank is suitable for freshwater and saltwater set-ups. It comes in black or white, so you can match it to your room before you plan the rest of the setup.
Because the filter and light are included, your first aquarium kit is mostly about placement, assembly and learning how the lid and accessories work. This guide walks through those steps using only the features confirmed for this model.
Key CAPRI 60 LED specifications at a glance
-
CAPRI 60 LED - 60 L: 60-litre capacity with 4 mm thick glass. Gives you a clear size baseline for choosing a location and planning the tank's footprint.
CAPRI 60 LED - 60 L
-
CAPRI 60 LED - 60 L: Includes an internal Bluwave 01 two-stage filter (mechanical and adsorbent), filtering material and pump. You do not need to buy a separate filter for the initial setup; the kit covers mechanical and adsorbent filtration.
-
CAPRI 60 LED - 60 L: 8.5 W LED bar with transformer, rated for up to 30,000 hours of light and 50% lower power consumption than fluorescent bulbs. The supplied lighting is part of the kit, so you can plan the tank around it rather than adding a separate light.
-
CAPRI 60 LED - 60 L: Watertight lid, not hinged to the tank, tested to withstand damp and splashes. Explains the lid design you will handle during maintenance and feeding.
Setting up your CAPRI 60 LED, step by step
- 1. Choose a stable, level location: A 60-litre glass tank needs a firm, flat surface. Ferplast offers the matching Stand 60 separately; using a purpose-built stand helps support the tank. Keep the area away from direct heat and strong vibrations, and leave room to open the wide front door and lift the lid.
- 2. Unpack and check the components: Confirm you have the tank, the 8.5 W LED bar with transformer, the Bluwave 01 filter, its filtering material and pump. The lid is a separate watertight piece, not hinged, so set it aside safely while you work.
- 3. Position the internal filter: The Bluwave 01 is an internal filter. Place it according to the layout you want, making sure it sits securely and does not obstruct the front door or the lid opening. The filter comes complete with filtering material and a pump, so no extra filter media is required for the initial setup.
- 4. Fit the LED bar: Install the 8.5 W LED bar using its transformer as supplied. The LED lighting is designed for low energy consumption and bright colour rendering. Route the cable so it does not cross the lid opening or the front door.
- 5. Plan for accessories before filling: The lid has a useful door for an automatic fish feeder, and special snap-off plugs allow delivery and suction tubes and an external filter to pass through. If you plan to use any of these, set up the openings now so you do not have to disturb the tank later.
- 6. Fill and check for leaks: Fill the tank with water suitable for your planned freshwater or saltwater set-up. Watch the seams and the lid area for any signs of leakage. The lid is watertight and tested against damp and splashes, but it is not hinged, so handle it carefully when checking.
- 7. Start the filter and lighting: Once filled, start the Bluwave 01 pump and switch on the LED bar. Confirm water is moving through the filter and the light comes on. The filter's two stages (mechanical and adsorbent) work together to keep water clear, but follow the filter's own instructions for any media replacement schedule.
Using the lid and front door day to day
The CAPRI 60 LED is designed for easy operation. The wide front door opens for maintenance, so you can reach into the tank without removing the entire lid. The lid itself is not hinged; it lifts off completely and is watertight, tested to withstand damp and splashes. That makes it straightforward to set aside during a water change, but it also means you need a safe place to put it down.
For feeding, the lid includes a dedicated door that can accommodate an automatic fish feeder. If you prefer to feed by hand, the front door gives you access without lifting the whole lid. The snap-off plugs are there for tubes and an external filter, so plan their use before you fill the tank.
What the supplied information does not cover
The CAPRI 60 LED record confirms the tank's capacity, glass thickness, filter, lighting and lid features, but it does not include a stocking guide, fish species recommendations, feeding amounts, water treatment steps or a cycling schedule. Those decisions depend on the fish you plan to keep and your local water, so treat this guide as the equipment setup and check separate, reliable sources for livestock and water chemistry advice.
Similarly, the record does not state a replacement interval for the filter media or a maintenance timetable. Use the filter manufacturer's guidance for media changes and follow general aquarium practice for partial water changes, without assuming a schedule that is not supplied here.



