What This Piece Brings to Your Cavern
The Cascading Pool Cavern Corner (Unpainted) is a single Dwarvenite piece from the KS6 Plaguestone line. It adds a built-in cascading pool to a corner section, so you can create a natural water transition in your underground layouts. Because it's unpainted, you decide how the stone and water look on your table.
This guide covers what the catalog confirms, how to prep the piece, and practical painting steps for both the cavern stone and the water feature. It does not invent painting recipes or assembly steps beyond what the supplied information supports.
Catalog Facts That Shape Your Prep
-
Cascading Pool Cavern Corner (Unpainted): Crafted from durable Dwarvenite and designed for the KS6 Plaguestone line. Dwarvenite is a tough, lightweight material that doesn't require sealing before painting. The piece is part of a specific terrain line, so it fits with other Plaguestone cavern pieces.
Cascading Pool Cavern Corner (Unpainted)
-
Cascading Pool Cavern Corner (Unpainted): Compatible with Dwarven Forge anchor magnets for secure modular connections. If you plan to integrate this corner into a larger modular cavern, you can add anchor magnets to keep sections aligned during gameplay.
-
Cascading Pool Cavern Corner (Unpainted): Unpainted Dwarvenite construction allows you to customize the finish to match your existing terrain. You can paint the stone to match your current cavern set, and treat the water feature separately for a realistic effect.
Prep Sequence for an Unpainted Piece
The supplied information does not include manufacturer washing or priming instructions. Based on typical Dwarvenite handling, here is a reasonable prep sequence:
- Inspect the piece: Check for any flash or mold lines. Dwarvenite usually requires minimal cleanup, but a quick inspection saves painting time.
- Wash gently: If you prefer to remove any release agent, wash the piece with mild soap and warm water. Let it dry completely.
- Test fit with other pieces: Before painting, place the corner next to other Plaguestone cavern sections to confirm the fit and plan the water flow direction.
- Optional: add magnets: If you use anchor magnets, install them now. The catalog confirms compatibility but does not specify magnet size or installation method.
Painting the Cavern Stone
The unpainted Dwarvenite surface takes paint well without primer. The catalog does not specify a recommended paint type, so choose acrylics suitable for terrain. Here is a suggested sequence:
- Base coat: Apply a medium gray or your cavern's base color. Two thin coats cover better than one thick coat.
- Drybrush highlights: Use a lighter gray or off-white to drybrush the raised stone edges. This brings out the cavern texture.
- Wash or shade recesses: Apply a dark wash (thinned black or dark brown) into the crevices to add depth. Wipe excess from raised areas.
- Seal if needed: The catalog does not specify sealing, but a matte varnish protects the paint during handling.
Painting the Cascading Pool
The cascading pool is a built-in detail that benefits from a separate treatment to read as water. The catalog does not provide painting instructions, so here is a common approach:
- Base the water area: Paint the pool surface with a dark blue-green or turquoise. Avoid covering the stone edges.
- Add depth layers: Drybrush lighter blue or white along the cascade edges to suggest flowing water. You can also add a thin gloss medium to simulate wetness.
- Highlight the cascade: Use white or light blue lines to indicate water falling over the lip. Keep the effect subtle for a natural look.
What the Catalog Does Not Settle
The supplied information does not include specific paint brands, drying times, or sealing recommendations. It also does not confirm whether the pool detail is a separate insert or molded into the Dwarvenite. Treat the water effect as a single sculpted surface. If you want a glossy water finish, test a gloss medium on a hidden area first.
