Quick answer
The RS-5 Stainless Slip-On with carbon fiber muffler is listed for the 2009–2026 Honda CBR600RR and mounts as a slip-on, not a full system. Check your model year and confirm the mid-pipe connection before ordering, then follow the steps below for a clean install.
Why the RS-5 shape and materials matter on a CBR600RR
The RS-5 uses a trapezoidal sleeve that follows the race-inspired lines of under-tail muffler configurations, so it visually complements the CBR600RR rather than looking like a generic add-on. The stainless construction and carbon fiber cone-endcap are the defining materials here—stainless for the sleeve and carbon fiber for the endcap—so care routines differ between the two surfaces.
Because the RS-5 is a slip-on, it reuses the stock header and mid-pipe. That keeps the install simpler than a full system, but it also means the muffler is only one part of the exhaust path; don't expect a full-system-level change in flow.
What the removable low-volume insert changes
The RS-5 has a straight baffle with a removable low-volume insert. Leaving the insert in reduces volume; removing it opens up the sound. The catalog does not supply decibel figures for either configuration, so treat the insert as a tunable starting point rather than a guaranteed pass/fail for any given track or noise ordinance.
CBR600RR RS-5 Slip-On: Common Questions Answered
Will this RS-5 slip-on fit my 2009–2026 CBR600RR?
The product is listed for the 2009–2026 CBR600RR. Confirm your exact model year and that your bike still has the stock mid-pipe connection, since the slip-on is designed to mate with it. Check your VIN or model-year sticker before ordering.
Does it include a carbon fiber muffler?
Yes—this version is the RS-5 Stainless Slip-On with a carbon fiber muffler and a carbon fiber cone-endcap. Clean and protect the carbon endcap separately from the stainless sleeve.
What's involved in installing the RS-5 stainless slip-on?
Support the bike, let the exhaust cool, then remove the stock muffler from the mid-pipe. Slide the RS-5 onto the mid-pipe, align the mounting point, and tighten hardware evenly. Start the engine and check for leaks at the joint before riding. Recheck fastener torque after the first heat cycle.
Can I change the sound volume?
The RS-5 has a straight baffle with a removable low-volume insert. Keep the insert in for a quieter setup or remove it for more sound. No decibel ratings are supplied, so verify against local noise rules if that matters to you.
Is this a full exhaust system?
No—it's a slip-on. It replaces the muffler section and reuses the stock header and mid-pipe. If you need a full system, this is not the right part.
Product facts
-
CBR600RR 09-26 RS-5 Stainless Slip-On Exhaust, w/ Carbon Fiber Muffler: The RS-5 is a slip-on with a trapezoidal stainless sleeve, carbon fiber cone-endcap, and a straight baffle with a removable low-volume insert. The slip-on design simplifies installation, while the insert lets you adjust volume without changing parts.
CBR600RR 09-26 RS-5 Stainless Slip-On Exhaust, w/ Carbon Fiber Muffler