Start with your array size and tilt
Before you order any flown hardware for CDL12P loudspeakers, answer two questions: How many cabinets will hang in the vertical array, and will the rig use a CDL Rigging Extension Bar with a tilt of 12° or more? The answers decide whether you need the CDL12P Rigging Grid, the CDL12P Rigging Sling, or both.
The supplied product information gives clear thresholds. The CDL12P Rigging Grid is required when suspending two or more arrayed CDL12P loudspeakers, and up to six CDL12P loudspeakers can be suspended in a vertical array. The CDL12P Rigging Sling is required on all installations that include four or more CDL12P loudspeakers in a vertical array. It is also required when the CDL Rigging Extension Bar is deployed with an upward or downward tilt of 12° or greater.
What the CDL12P Rigging Grid covers
-
CDL12P Rigging Grid: The CDL12P Rigging Grid is required when suspending two or more arrayed CDL12P loudspeakers. If your design has two or more CDL12P cabinets in a vertical array, the grid is the first piece of hardware to include.
CDL12P Rigging Grid
-
CDL12P Rigging Grid: Up to six CDL12P loudspeakers can be suspended in a vertical array. This sets the upper cabinet count for a single vertical array using this hardware, so plan array size within that limit.
When the CDL12P Rigging Sling becomes mandatory
The sling is not an optional add-on for every array. It becomes required in two specific situations: when the vertical array includes four or more CDL12P loudspeakers, or when the installation uses the CDL Rigging Extension Bar with an upward or downward tilt of 12° or greater.
That means a two- or three-speaker array without the extension bar tilt does not trigger the sling requirement in the supplied information. A four-speaker array does. A two-speaker array with a 12° tilt on the extension bar also does. Check both conditions separately so neither is missed.
What the CDL12P Rigging Sling covers
-
CDL12P Rigging Sling: The CDL12P Rigging Sling is required on all installations that include four or more CDL12P loudspeakers in a vertical array. Once your array reaches four cabinets, the sling moves from optional to required hardware.
CDL12P Rigging Sling
-
CDL12P Rigging Sling: In installations using the CDL Rigging Extension Bar deployed with an upward or downward tilt of 12° or greater, the CDL Rigging Sling must be utilized. Tilt angle alone can make the sling mandatory, even if the array has fewer than four cabinets.
A practical order for specifying CDL12P flown hardware
- 1. Count the cabinets in the vertical array: Confirm how many CDL12P loudspeakers will hang in the array. The grid is required for two or more, and the maximum is six per the supplied information.
- 2. Check the extension bar tilt: If the design uses the CDL Rigging Extension Bar with an upward or downward tilt of 12° or greater, the sling is required regardless of cabinet count.
- 3. Apply the four-speaker rule: If the array includes four or more CDL12P loudspeakers, add the CDL12P Rigging Sling to the hardware list.
- 4. Add the grid for any array of two or more: The CDL12P Rigging Grid is the base suspension component for two or more arrayed CDL12P cabinets.
- 5. Verify the final combination: Cross-check that every condition in your design is covered: array size, tilt angle, and the presence of the extension bar. The supplied information does not list installation steps beyond these requirements, so follow the manufacturer's full rigging documentation for assembly and safety procedures.
Grid vs sling at a glance
- CDL12P Rigging Grid: Required when suspending two or more arrayed CDL12P loudspeakers. Supports vertical arrays of up to six CDL12P cabinets per the supplied information.
- CDL12P Rigging Sling: Required for arrays of four or more CDL12P loudspeakers, and required when the CDL Rigging Extension Bar is used with an upward or downward tilt of 12° or greater.
What the supplied information does not cover
The supplied records do not include load ratings, hardware specifications, or step-by-step installation instructions for either accessory. They also do not confirm compatibility with CDL series cabinets other than the CDL12P. Treat the thresholds above as the supplied requirements, and consult the full manufacturer documentation for engineering and safety details before flying any array.

