Quick answer

Measure your current light cover's diameter, depth, and mounting style before ordering a replacement. Check the fan model number to confirm compatibility, especially for brands like Sofucor.

Why size and fit matter more than you think

A light cover that is too small can wobble or fall, while one that is too large may not seal properly or could touch the fan blades. The wrong fit can also cause the light to flicker or the cover to crack from heat buildup.

Most ceiling fans use a standard mounting ring, but the cover's depth and shape vary. A shallow cover works for low ceilings, while a deeper one may be needed for larger bulbs or LED modules.

Frequently asked questions

How do I measure my old light cover?

Remove the existing cover and measure its diameter across the widest point. Also measure the depth from the mounting ring to the bottom. Write these numbers down before shopping for a replacement. Always measure twice to avoid ordering the wrong size.

What if my fan model isn't listed for a replacement cover?

Check the fan's model number on a sticker inside the canopy or on the motor housing. If the cover is sold as a generic part, compare its diameter and mounting ring type (twist-lock, screw-on, or clip) to your old one. If the model number is missing, take a photo of the mounting area to compare with product images.

Can I use a glass cover instead of acrylic?

Yes, but glass is heavier and may require a stronger mounting ring. Acrylic is lighter and less likely to break during installation, but it can scratch more easily. Check your fan's weight limit before switching materials. Stick with the same material type as the original unless the fan supports a heavier cover.

What if the new cover doesn't fit the mounting ring?

The mounting ring may have a different thread pitch or locking mechanism. Some brands use proprietary designs. If the cover doesn't twist or snap into place, it may be incompatible. Return it and find one that matches your ring type. Never force a cover onto a ring—it can damage the threads or the cover itself.

How do I know if the cover is the right depth?

After installing, the cover should not touch the light bulbs or LED module. Leave at least 1/4 inch of clearance to prevent overheating. If the cover presses against the bulbs, choose a deeper model or shorter bulbs. A cover that touches the bulbs is a fire hazard—replace it or switch to shorter bulbs.

Product facts

  • KBS-6003-BK-DC-HTM-60-Light Cover: The Sofucor KBS-6003-BK-DC-HTM-60-Light Cover is an acrylic lamp shade listed as a light cover accessory for the KBS-6003-BK-DC-HTM-60 model. Using a model-specific cover like this ensures the mounting holes and depth match, preventing fit issues that generic covers might cause.

    KBS-6003-BK-DC-HTM-60-Light Cover

    KBS-6003-BK-DC-HTM-60-Light Cover