Start with the motor mount, not the airframe

A 3.90" airframe sets the outer diameter, but the motor mount configuration decides which centering ring you need. The CR-3.90 family covers single 29mm, 38mm, 54mm, and 75mm mounts, plus cluster layouts including 4x29mm, 3x29mm, 3x38mm, 7x29mm, and a mixed 1x38mm/3x24mm. Each variant is listed for a specific mount, so match the ring to the motor tube arrangement you are building.

The listing also includes bulkheads and LOC-N-Ring adaptors. The BA-3.90 bulkhead fits inside a TC-3.90 tube coupler for a 3.90" airframe and includes a 1/4" wood bulk plate with an SCM3 1/4" eye bolt. The LNR-3.90-54mm3S and LNR-3.90-54mm4S are centering rings for a 54mm motor mount in a 3.90" airframe. If you are not sure which group your build falls into, confirm your motor tube size first.

What the CR-3.90 listing confirms

  • Centering Rings for 3.90" Airframe: CR-3.90-29mm: centering rings for BT-3.90 to 29mm motor mount, 2 pack, 1/8" thick, includes eye bolt and Z Clip motor retention. Confirms the smallest single-mount option and the hardware included for recovery and motor retention.

    Centering Rings for 3.90" Airframe

    Centering Rings for 3.90" Airframe

  • Centering Rings for 3.90" Airframe: CR-3.90-38mm: centering rings for BT-3.90 to 38mm motor mount, 3 pack, 1/4" thick, includes SCM3 1/4" eye bolt and Z Clip motor retention. Shows the thicker ring and hardware package for a 38mm mount.

  • Centering Rings for 3.90" Airframe: CR-3.90-54mm and CR-3.90-75mm: centering rings for BT-3.90 to 54mm and 75mm motor mounts. Covers the larger single-mount options so you can match the ring to your motor tube.

  • Centering Rings for 3.90" Airframe: Cluster variants include CR-3.90-4x29mm, CR-3.90-3x38mm, CR-3.90-3x29mm, CR-3.90-7x29mm, and CR-3.90-1x38mm-3x24mm. Lists the cluster configurations the catalog supports, including the 7x29mm forward ring that has a 3x29mm motor config.

Dry-fit the ring and motor tube before any adhesive

The supplied information does not include a step-by-step glue procedure, cure times, or adhesive recommendations. Treat the dry-fit as your own verification step: slide the centering ring over the motor mount tube and into the airframe without glue, and confirm the ring sits where you need it. The listing confirms the ring fits inside the airframe tube and over the motor mount tube, but it does not confirm clearance for your specific tube coupler, fin tabs, or internal hardware.

Some variants include features that affect the dry-fit. The CR-3.90-7x29mm forward ring has a 3x29mm motor configuration, and the listing notes that forward rings can be notched to accept a recovery Y harness or similar. The slotted rings accept 3-fin or 4-fin 0.25" plywood, and the listing identifies several kits that use the same rings, including the 4" ULTIMATE, 4" AWM Red Der Max, Aerotech Mega Initiator, 4" Goblin, IRIS, Black Brant, HAWK, and Phoenix. If you are building one of those kits, the ring family is already matched to that design; still check the actual parts in hand.

Fit checkpoints the listing supports

  • Motor mount diameter: Confirm 29mm, 38mm, 54mm, 75mm, or the cluster layout before ordering. The variant name states the mount it is made for.
  • Ring thickness and pack count: The 29mm ring is listed as 2 pack, 1/8" thick. The 38mm ring is listed as 3 pack, 1/4" thick. Other variants list their own pack and thickness where supplied.
  • Included hardware: Some variants include an eye bolt and Z Clip motor retention; the 38mm and certain other variants specify an SCM3 1/4" eye bolt. Check the variant description for what is in the package.
  • Forward ring features: The 7x29mm forward ring has a 3x29mm motor config, and forward rings can be notched for a recovery Y harness. Confirm this matches your recovery plan.
  • Bulkhead and adaptor fit: The BA-3.90 bulkhead fits a TC-3.90 tube coupler, and 4" LOC-N-Ring adaptors will bolt up according to the listing. Verify these interfaces on your build.

Where the catalog stops and your build takes over

The supplied record does not include adhesive type, cure time, surface preparation, or temperature limits. It also does not confirm fit with every airframe coupler or fin tab thickness beyond the slotted ring notes. Use the dry-fit to catch interference before glue, and follow your own kit instructions or adhesive manufacturer guidance for the bond. If a dimension is not stated in the listing, measure your parts rather than assuming a clearance.

For a scratch build, the CR-3.90 line covers a wide range of single and cluster mounts, but the listing is the authority on what each variant includes. Order the variant that matches your motor tube, confirm the hardware in the package, and dry-fit the full stack before you commit to adhesive.