Start with the tools you actually have

Mounting a baby monitor on a wall usually comes down to a handful of small fasteners, a bracket, and a level surface. The Character 5-Piece Tool Set is a compact tote-and-tool combo intended as a starter set for first projects and unexpected fixes. That makes it a reasonable thing to keep nearby during a nursery setup, but it is not a substitute for the specific hardware and instructions that come with your mount.

Before you reach for any tool, read the mounting instructions supplied with your Nanit wall mount or stand. The tool set does not include mounting hardware, and the supplied catalog information does not list which fasteners, drill bits, or anchors the set contains. Treat the set as a helper for the general tasks around the install, not as the source of truth for how the mount attaches.

What the Character 5-Piece Tool Set gives you

  • Character 5-Piece Tool Set: Compact tool tote with five tools, described as an ideal starter set for first projects and unexpected fixes. A nursery install often needs a small, easy-to-grab kit rather than a full toolbox, and this set is sized for that role.

    Character 5-Piece Tool Set

    Character 5-Piece Tool Set

  • Character 5-Piece Tool Set: Available in the Midnight color option. If the set will live in a nursery or closet, the color option is the only variant detail the catalog confirms.

  • Character 5-Piece Tool Set: Catalog price is USD 39.50, listed against a comparison price of USD 79.00 with a stated 30% saving. The listing presents this as a limited-time offer, so confirm the price at checkout rather than assuming it will hold.

A safe order of work for mounting day

These steps keep the monitor and the wall safe while you work. They do not replace the mount manufacturer's instructions, which take priority for every fastener and placement decision.

  1. Clear the wall and check for hazards: Move the crib, shelf, and any cords away from the mounting spot before you start. Confirm with a qualified person that the wall section is suitable for the mount you have, especially if you are unsure what is behind the drywall.
  2. Lay out the mount hardware first: Open the mount box and separate its screws, anchors, bracket, and template. The Character 5-Piece Tool Set does not supply these parts, so identify them before you pick up a tool.
  3. Match each tool to its job: Use the tool that fits the fastener rather than forcing a larger or smaller one. The catalog does not list the exact tools in the set, so check the tote contents against the fasteners in front of you.
  4. Keep the monitor off the wall until the bracket is secure: Attach and test the bracket or stand first, then add the monitor. This avoids holding a device in one hand while tightening hardware with the other.
  5. Route cords out of reach: After mounting, keep power and any other cords well away from the crib and out of a child's reach. Cord placement is a safety decision, not a tool decision, and the supplied catalog does not give a specific routing method.
  6. Do a gentle pull test and tidy up: Give the mounted bracket a light, careful check before trusting it with the monitor. Put the tools back in the tote and store them where a child cannot reach them.

Where the tool set helps, and where it does not

The set earns its place for the small, low-risk jobs around a monitor install: tightening a bracket, adjusting a stand, or handling a loose fitting on a piece of nursery furniture. Its compact tote also makes it easy to keep in one spot so you are not searching for a screwdriver during a nap window.

It does not replace a drill, a stud finder, or the anchors and screws that come with a wall mount. The supplied information does not confirm that the set includes any of those items, and it does not provide care, safety, or operating instructions for the tools themselves. If your mount instructions call for a specific bit size or anchor type, follow those instructions and use the correct hardware rather than improvising with what is in the tote.

Tool set versus the mount hardware

  • Character 5-Piece Tool Set: Compact tote plus five tools, positioned as a starter set for first projects and quick fixes. Useful for general tightening and adjustment around the nursery.
  • Nanit wall mount or stand hardware: The bracket, fasteners, and installation instructions that actually hold the monitor. These come with the mount, not with the tool set.
  • What you may still need: A drill, a level, and any anchors specified by your mount instructions. The supplied catalog does not confirm these are included in the tool set.

What the supplied information does not confirm

The catalog does not list the individual tools inside the Character 5-Piece Tool Set, the materials they are made from, or any age or supervision guidance for the set. It also does not state that the set is compatible with a specific Nanit mount or that it includes mounting hardware. If those details matter for your install, check the product listing or the mount instructions before you buy or begin.

For the monitor itself, follow the setup guidance that ships with your Nanit product. The tool set is a convenience for the work around the install, not a certified part of the mounting system.