Why Corner Swabs for Sensor Edges?
Standard sensor swabs do a great job on the main sensor surface, but dust often collects in the corners and edges where a flat swab can't reach. Corner swabs are shaped to get into those tight spaces without pressing too hard or leaving residue.
VisibleDust offers two corner swab options: the DHAP Orange Corner Swabs (compatible only with VDust Plus) and the Ultra MXD-100 Green Corner Swabs (compatible with all VisibleDust wet cleaning solutions). Both are designed specifically for cleaning sensor edges and corners.
Corner Swab Options for Edge Cleaning
-
VisibleDust DHAP Orange Corner Swabs (16-Pack): Precise cleaning down to the corners. Cleans even under lighter pressure. Compatible ONLY with VDust Plus. If you already use VDust Plus, these swabs are tailored for corner cleaning without needing a different liquid.
VisibleDust DHAP Orange Corner Swabs (16-Pack)
-
VisibleDust Ultra MXD-100 Green Corner Swabs (16-Pack): Microfiber structure. No lint formation, no threads. Suitable to clean hard-to-reach corners. Compatible with all VisibleDust liquids. If you use other VisibleDust wet solutions (like Sensor Clean or Smear Away), the MXD-100 swabs give you the same corner access with broader liquid compatibility.
VisibleDust Ultra MXD-100 Green Corner Swabs (16-Pack)
How to Clean Sensor Edges with Corner Swabs
The following steps assume you have a compatible wet solution (VDust Plus for DHAP Orange swabs, or any VisibleDust liquid for MXD-100 Green swabs). Always work in a clean, dust-free environment.
- Prepare the swab: Take one corner swab from the pack. Apply a drop of your chosen cleaning solution to the tip. The swab is designed to clean both sides, so you can flip it for a second pass if needed.
- Position the swab: Hold the swab at a slight angle so the pointed tip reaches the sensor edge or corner. Do not press hard; the swab's shape is designed to clean effectively with light pressure.
- Clean the edge: Gently wipe along the sensor edge from one side to the other. Use a fresh swab for each corner if dust is heavy. The microfiber structure of the MXD-100 prevents lint, and the DHAP fabric is specifically made for corner dust removal.
- Inspect and repeat if needed: After cleaning, inspect the sensor with a bright light (like the SwabLight). If dust remains in the corners, repeat with a new swab. One swab per cleaning session is usually enough for light dust.
Which Corner Swab Should You Choose?
Your choice depends on the cleaning solution you already use. If you're committed to VDust Plus, the DHAP Orange Corner Swabs are a perfect match. If you prefer the flexibility to use any VisibleDust liquid, the Ultra MXD-100 Green Corner Swabs are the better option. Both packs contain 16 swabs, giving you multiple cleaning sessions.
Neither swab is designed for dry cleaning; they work best with a compatible wet solution. The supplied evidence confirms that both are tailored for hard-to-reach areas, so you can trust either to handle sensor edge dust effectively.

