Why Use E-Cloth for Optics?

Dust, fingerprints, and water spots can degrade the performance of lenses, mirrors, and other optical surfaces. The E-Cloth Glass and Polishing Cloth is designed specifically for optics, using microscopic fibers to lift and trap contaminants without scratching or leaving lint behind. It is an 80% polyester and 20% polyamide blend that provides a lint-free, non-marking finish.

Whether you are cleaning a single lens or maintaining multiple optical components, the cloth works on damp or dry surfaces. For heavy residue, use the cloth folded as a multi-sided pad to absorb moisture and fingerprints. The cloth is safe for glass, polished surfaces, and coated optics when used as directed.

How to Clean Optics with E-Cloth

The following steps are based on the supplied care instructions for the E-Cloth Glass and Polishing Cloth.

  1. Prepare the cloth: Start with a clean, damp E-Cloth. If the cloth is new or has been stored, rinse it with water and wring it out. The cloth should be damp, not dripping.
  2. Wipe the optical surface: Gently wipe the lens, mirror, or other optical component using light pressure. The microscopic fibers will lift dust, water spots, and fingerprints. Do not use on glass that is too hot to touch.
  3. Dry or polish (optional): For a streak-free finish, use a dry section of the cloth to buff the surface. The cloth can also be used dry for light dust removal.
  4. Rinse and hang dry after each use: After cleaning, rinse the cloth with water and wring it out. Hang it to dry. Do not use bleach, fabric softener, or dryer sheets, as these can damage the fibers.

Care and Maintenance of the Cloth

To keep the E-Cloth performing well, wash it weekly in a machine at up to 90°C (hot) with a small amount of detergent. For deeper cleaning, boil the cloth in just water to remove grease and residue. If fabric softener is used by accident, rewash with detergent on the highest temperature setting.

The cloth comes with a 1-year or 100-wash promise when used and cared for as recommended. Note that the cloth is a polyester/polyamide blend and will melt if exposed to high heat, so avoid contact with hot surfaces or open flames.

Product Options at a Glance

  • E-Cloth Glass and Polishing Cloth: Single E-Cloth Glass and Polishing Cloth, 16 in x 20 in (406.4 mm x 508 mm), alaskan blue. Ideal for personal or single-device use, such as cleaning one camera lens or a pair of glasses.

    E-Cloth Glass and Polishing Cloth

    E-Cloth Glass and Polishing Cloth

  • E-Cloth Glass and Polishing Cloth 4-Pack: E-Cloth Glass and Polishing Cloth 4-Pack, same dimensions, includes colors alaskan blue, daffodil yellow, magenta, and lime. Convenient for multiple workstations, different optical surfaces, or sharing among team members.

    E-Cloth Glass and Polishing Cloth 4-Pack

    E-Cloth Glass and Polishing Cloth 4-Pack

What to Avoid

Do not use the cloth on hot glass. Avoid bleach, fabric softener, and dryer sheets in the wash, as they can clog the fibers and reduce cleaning effectiveness. The cloth is not designed for abrasive cleaning or for use with chemical solvents not mentioned in the care instructions. For stubborn residues, a damp cloth with plain water is sufficient per the supplied guidelines.