Quick answer

Prime your miniatures with Colour Primer Wolf Grey in thin, quick passes to establish a cool grey-blue basecoat that saves painting time on Space Wolves, urban fatigues, and cold colour schemes. Shake thoroughly, spray at 15–20 cm in short bursts, and let the acrylic primer dry before touching the model.

Why Wolf Grey works as a neutral cold base

Wolf Grey is a greyish blue, so it sits between neutral grey and blue without pushing either too far. That makes it a practical starting point for cold colour schemes where you want shadows to feel icy rather than muddy. It also works as a great alternative to blue for furs, monsters, and urban fatigues.

Because the primer is acrylic and fast drying, you can move from spraying to painting sooner. The precision nozzle helps you aim at specific areas, but the main benefit is speed: a single basecoat in your chosen colour reduces the number of layers you need later.

When to choose a different primer

Wolf Grey is not a universal undercoat. If your scheme relies on warm reds, yellows, or earthy browns, a warmer primer will support those colours better. Similarly, if you need pure neutral grey for colour testing, a dedicated grey primer may be more predictable. Wolf Grey carries a blue tint, so it will influence every layer you put over it.

The catalog lists 24 colours in the Colour Primer range, but availability of specific colours is not shown here. If Wolf Grey is out of stock, check the range for another cool neutral rather than forcing a warm primer into a cold scheme.

Step-by-step: basecoating with Wolf Grey

  1. Prepare the model and workspace: Clean mold lines and dust from the miniature, then mount it on a handle or temporary base. Work outdoors or in a well-ventilated area. Common mistake: spraying too close to other models or nearby surfaces because the workspace is cluttered. Keep a test piece of sprue nearby to check coverage before committing to the model.
  2. Shake the can thoroughly: Shake for at least two minutes after the mixing ball rattles freely. Cold or recently stored cans need longer. Common mistake: a brief shake that leaves pigment uneven, which shows up as a streaky or glossy patch on the model. If the first pass looks thin or watery, stop and shake again rather than spraying more.
  3. Spray in thin, quick passes: Hold the can 15–20 cm from the model and use short bursts, starting before the model and ending after it. Rotate the model to reach all angles. Common mistake: holding the can still in one spot, which floods detail and creates a pool in recesses. Aim for a light, even coat rather than full opacity in one go.
  4. Check coverage and add a second pass if needed: Let the first pass dry to the touch, then inspect under good light. A second thin pass is safer than one heavy coat. Common mistake: spraying over a wet coat, which can cause runs and obscure fine detail. If detail is already filled in, stop; you can touch up with a brush later.
  5. Let the primer cure before painting: Allow the acrylic primer to dry fully according to the can instructions before handling or painting. Fast drying helps, but full cure prevents paint from flaking. Common mistake: starting to paint while the surface is still tacky. Test a hidden area with a light finger touch; if it feels cool or tacky, wait longer.

Product facts

  • Colour Primer: Wolf Grey: Wolf Grey is a greyish blue colour, described as perfect for Space Wolves or Urban fatigues, furs, monsters, or as a great alternative to blue. That built-in blue-grey tone means you can skip a separate blue basecoat on cold armies and go straight to shading and highlights.

    Colour Primer: Wolf Grey

    Colour Primer: Wolf Grey

  • Colour Primer: Wolf Grey: The primer is a fast-drying acrylic with a precision nozzle, and it is designed to leave every detail on the miniature in excellent condition. Fast drying reduces handling time, while the nozzle helps you avoid over-spraying fine detail during quick passes.