Why a Compact V-Mount Battery for Mirrorless?
Mirrorless cameras are small and light, but their internal batteries can drain fast when you're powering a monitor, wireless transmitter, or other accessories. A compact V-mount battery lets you run everything from a single power source without adding a heavy brick to your rig.
The key is finding a mount that fits your camera cage. The Dynacore D-MS-CA Tiny V-Lock is designed specifically for this: it attaches directly to a cage using a standard 1/4-20 thread, so you don't need a separate battery plate or extra brackets.
Setting Up the Dynacore D-MS-CA on Your Cage
The Dynacore Tiny V-Lock Cage mount is a small adapter that lets you attach a V-mount battery to any camera cage with a 1/4-20 threaded hole. Here's how to install it:
- 1. Locate a 1/4-20 threaded point on your cage: Most cages have several threaded holes on the top, side, or bottom. Choose one that keeps the battery balanced and doesn't block camera controls or ports.
- 2. Screw the Dynacore D-MS-CA into the thread: The mount has a built-in 1/4-20 bolt. Tighten it securely with a coin or hex key. The mount is only 112 x 83 x 26 mm and weighs 0.1 kg, so it won't add much bulk.
- 3. Attach a V-mount battery: Slide a compact V-mount battery onto the mount until it clicks. The battery will sit flat against the cage, keeping the rig narrow.
- 4. Connect your equipment via the D-tap outputs: The Dynacore mount includes two D-tap outputs. Use one to power your camera (with a compatible D-tap to dummy battery cable) and the other for an accessory like a monitor or wireless follow focus.
Dynacore D-MS-CA Key Specifications
-
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage: Weight: 0.1 kg, dimensions: 112 x 83 x 26 mm. This mount is small enough to leave on your cage permanently without making the rig cumbersome.
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
-
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage: Includes two D-tap outputs for powering multiple devices. You can power your camera and an accessory from the same battery, reducing cable clutter.
-
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage: Fixes to any cage position using a 1/4-20 thread. You can place the battery where it balances best, rather than being stuck with a fixed bracket location.
Choosing the Right V-Mount Battery for Your Rig
Compact V-mount batteries (often called "mini" or "tiny" V-locks) are ideal for mirrorless setups. They're lighter than full-size cinema batteries but still provide enough capacity for several hours of shooting. Look for a battery that fits the Dynacore mount and has a D-tap output for your camera's dummy battery.
The supplied information does not specify the maximum battery weight the Dynacore D-MS-CA can support, so stick with smaller V-mount batteries (typically 50–95 Wh) to keep the rig balanced and avoid putting too much leverage on the cage mount.
Powering Your Mirrorless Camera from a V-Mount Battery
To power your mirrorless camera from the V-mount battery, you'll need a D-tap to dummy battery cable specific to your camera model. The Dynacore mount's D-tap outputs are standard, so any quality cable should work. Connect the cable from one D-tap port to your camera's dummy battery, and your camera will run directly from the V-mount battery.
This setup lets you shoot all day without swapping internal batteries, and it frees up your camera's battery compartment for a backup if needed.



