What Corepad Skatez Do for the Delux M800 ULTRA
If you want your Delux M800 ULTRA to glide with less resistance, replacing the stock mouse feet with Corepad Skatez is a direct upgrade. These replacement skates are made from 100% pure PTFE (polytetrafluoroethylene), the same material often referred to by the trade name Teflon. The result is a very low stiction coefficient (below 0.06 μ), which means the mouse starts moving more easily and maintains a smooth slide across the pad.
Key Specs That Affect Fit and Glide
Each pack contains 2 sets of Skatez, enough to replace the feet on one mouse. The thickness is 0.85 mm, which is thin enough to avoid raising the mouse body noticeably but still provides a durable sliding surface. The skates are naturally self-adhesive, using high-quality 3M self-adhesive foil for a secure bond.
Installing Corepad Skatez on the M800 ULTRA
Start with a clean, dry mouse base. Remove the original skates or any residue. Peel the backing from a Corepad Skate and align it with the original foot position. Press firmly to ensure good contact with the 3M adhesive. The skates are made with rounded edges to avoid scratching or hooking on your mousepad, so you don't need to trim them.
Because the adhesive is strong but the skates are thin, take care when positioning — you won't get a second chance to reposition without risking the bond.
Corepad Skatez for Delux M800 ULTRA – Product Facts
-
Corepad Skatez - Delux M800 ULTRA: Corepad Skatez consists of 100% pure quality PTFE with excellent lubrication at high load capacity. PTFE provides the low-friction glide that makes the M800 ULTRA feel smoother during fast flicks and tracking.
Corepad Skatez - Delux M800 ULTRA
-
Corepad Skatez - Delux M800 ULTRA: Thickness: 0.85 mm. This thin profile keeps the mouse height close to stock, so you won't notice a change in feel or sensor distance.
-
Corepad Skatez - Delux M800 ULTRA: 1 pack contains 2 sets of Skatez. You get one full replacement set for your M800 ULTRA, with a spare set for future use or for another compatible mouse.
Sensor Ring Caution
The manufacturer warns that the sensor ring (the thin PTFE ring that surrounds the sensor lens) is very thin and may not stick very well. This is why the Delux M800 ULTRA does not include them with the stock skates either. Use the sensor ring at your own risk. If you choose to apply it, place it carefully and accept that its adhesion may be less reliable than the main skate pieces.
What to Expect After Installation
Once installed, the Corepad Skatez will provide a noticeably smoother glide, especially on hard mousepads. The rounded edges prevent the skates from catching on the pad surface. If you feel any drag, double-check that the adhesive is fully bonded and that no debris is trapped under the skate. The PTFE material is self-lubricating, so the glide should remain consistent over time.
