What Corepad Skatez Do for Your VXE MAD R Series

If you want a smoother glide and consistent tracking on your VXE MAD R, Major, R+, or Major+ mouse, swapping the stock feet for Corepad Skatez is a straightforward upgrade. These replacement skates are made from 100% pure PTFE, the same material used in high-end aftermarket feet, and they come with a strong 3M adhesive for a secure fit.

Each pack contains two full sets of Skatez, so you have a spare set ready for your next replacement. The thickness is 0.85mm, which is a common standard for replacement feet — it should match the original height closely, so your mouse's sensor distance stays consistent.

Installing Corepad Skatez on Your VXE MAD R / Major / R+ / Major+

The supplied information does not include step-by-step installation instructions, but the process for replacing mouse feet is standard. Here is what you need to know based on typical aftermarket skate installation.

  1. Prepare your mouse: Power off your mouse and remove any existing skates. Use a plastic spudger or a heat source (like a hairdryer) to soften the adhesive if needed. Avoid metal tools that could scratch the mouse base.
  2. Clean the surface: Wipe the recessed skate areas with isopropyl alcohol to remove any adhesive residue and oils. Let it dry completely before applying the new skates.
  3. Apply the new Skatez: Peel the backing from one set of Corepad Skatez. Align each skate with its corresponding recess and press firmly. The 3M adhesive will hold them in place immediately.
  4. Break-in period: After installation, use the mouse on a cloth pad for a few hours. The PTFE will settle and the glide will become smoother. If you notice any unevenness, check that the skates are fully seated.

Compatibility and Glide Notes

These Corepad Skatez are designed specifically for the VXE MAD R, Major, R+, and Major+ models. The 0.85mm thickness is typical for replacement feet, so your mouse's lift-off distance should remain close to stock. If you use a hard pad, the pure PTFE material will still glide well, but the feel may be slightly faster than on cloth.

The supplied information does not confirm whether these skates include a sensor ring. If your mouse has a ring around the sensor lens, check the shape of the included skates — if a ring is missing, you can reuse the stock ring or purchase a separate set that includes one. This is not a flaw, just a detail to verify before you start.