When a header takes the hit

Off-road riding throws up roost and immovable objects, and the exhaust header is often the component that absorbs the impact. If your Yoshimura system on a 2009 or 2010 CRF450R has a dented, cracked, or otherwise damaged header, replacing that section is the practical fix. The CRF450R 09-10 Stainless RS4 Header is a replacement header intended to get you back up and going.

This is a repair decision, not an upgrade decision. The listing does not claim performance gains, weight savings, or a change in sound. Its job is to replace a damaged header on the specified machine.

What the replacement header listing confirms

  • CRF450R 09-10 Stainless RS4 Header: CRF450R 09-10 Stainless RS4 Header The name ties the part to the 2009–2010 CRF450R and to the RS4 system, so start by confirming your bike and system match.

    CRF450R 09-10 Stainless RS4 Header

    CRF450R 09-10 Stainless RS4 Header

  • CRF450R 09-10 Stainless RS4 Header: Catalog price: USD 136.96 (comparison price USD 214.00) Gives you a budget reference for the replacement before you commit.

  • CRF450R 09-10 Stainless RS4 Header: Available variant: Standard There is one listed variant, so the choice is mainly about confirming the part rather than picking options.

Confirming RS4 header fitment before you order

The supplied listing identifies this as a replacement header for the CRF450R 09-10 and names it as an RS4 header. Before ordering, check that your bike is a 2009 or 2010 CRF450R and that the exhaust currently on it is the RS4 system this header belongs to. The listing does not include a fitment chart, pipe diameter, or a list of other systems it may fit, so do not assume it will work with a different Yoshimura system or a different model year.

If you are unsure which header you need, the listing directs you to call 800-634-9166 or email [email protected]. That is the most reliable way to confirm the part against your specific bike and exhaust before you buy.

A sensible order for the header swap

The supplied information does not include a torque spec, gasket part number, or a step-by-step service procedure. Use your model's service manual for those details. The sequence below is about organizing the replacement, not a substitute for manufacturer instructions.

  1. Identify the damage: Confirm the header itself is the damaged component and not an adjacent part. The listing is for the header only.
  2. Verify the system and model year: Match your bike to the 2009–2010 CRF450R and your exhaust to the RS4 system before removing anything.
  3. Gather the right hardware: The listing does not state which gaskets, clamps, or fasteners are included. Check what your service manual calls for and what you already have.
  4. Remove the damaged header: Follow your service manual for the removal sequence and any specified torque values.
  5. Fit the replacement and check clearance: After installation, inspect routing and clearance before riding. The listing does not provide clearance figures, so rely on a visual check.

What the listing does not settle

The supplied information does not confirm whether gaskets or mounting hardware are included, what material grade the stainless steel is, or how the header affects sound or performance. It also does not provide installation torque values or a compatibility list beyond the CRF450R 09-10 RS4 application. Treat those as open questions to resolve with Yoshimura support or your service manual rather than assumptions.

If your header is damaged but the rest of the system is intact, this replacement part is the targeted fix. If you are unsure whether the damage extends to other components, confirm that before ordering so you do not replace a part that is not the source of the problem.