What the Cube Combo Includes
The Cube Combo is a three-piece starter set that gives you the core parts to power and move a simple brick-built creation. It contains a Battery Cube, a Geared Motor Cube, and an LED Cube. No extra wires, switches, or controllers are included — just the cubes themselves.
If you already own building bricks (the set is compatible with major brick brands), this combo is a low-cost way to add motion and light to your projects without buying a full kit.
At a Glance: What Each Cube Does
-
Cube Combo: The Battery Cube delivers approximately 3.7 – 4.2 volts DC when the power switch is turned on. It has a positive and a negative terminal. This voltage range powers the motor and LED; the switch lets you turn the whole circuit on and off.
Cube Combo
-
Cube Combo: The Geared Motor Cube rotates at more than 1,000 RPM internally, but the attached gears reduce the output to about 75 RPM for maximum torque. 75 RPM is slow enough to drive wheels or gears without overspeeding, making it ideal for small vehicles and mechanisms.
-
Cube Combo: The LED Cube is a polarity-sensitive device — current flows in one direction only. If the LED does not light, reversing the wire connections usually fixes it. Knowing this saves troubleshooting time: if the LED doesn't turn on, simply swap the connections rather than assuming a defect.
How the Cubes Work Together
The Battery Cube acts as the power source. Connect its positive terminal to the Geared Motor Cube's positive wire and the negative terminal to the motor's negative wire. The motor will spin at about 75 RPM, providing enough torque to turn wheels or gears.
To add the LED Cube, connect it in parallel with the motor (both connected to the same battery terminals). Remember the LED is polarity-sensitive — if it doesn't light, swap its two wire connections. The LED makes a bright searchlight or beacon for your build.
All connections are seamless and require no soldering. The cubes fit directly onto standard bricks, so you can integrate them into existing builds or start a new one.
What You Can Build with the Cube Combo
With just these three cubes, you can build a simple motorized car, a spinning sign, or a lighthouse with a rotating light. The geared motor's low speed and high torque are best for projects that need steady, strong motion rather than high speed.
Because the set includes only one motor and one LED, you are limited to one moving part and one light at a time. For more complex builds with multiple motors or lights, you would need additional cubes or a larger kit.
Safety and Care Notes
Circuit Cubes contain sensitive electronic components and lithium-ion batteries. Do not drop, burn, puncture, crush, disassemble, or expose them to excessive heat or liquids. Do not attempt to replace the batteries yourself — contact Tenka Inc. or an authorized service provider for recycling.
The set is safety-tested and approved for ages 8+. Keep away from small children who might swallow small parts.
Is the Cube Combo Right for You?
The Cube Combo is a good entry point if you want to experiment with motorized brick builds without committing to a larger kit. It is also useful as a replacement or expansion for existing Circuit Cubes sets.
However, if you need to control direction, speed, or multiple outputs, you will need additional cubes such as a switch or potentiometer. The combo is a starting set, not a complete system.
